FV-EV-2000P1O10

High frequency and high-precision voltage sensor (Instruction manual download）

1.Product Introduction

FV-EVSeries of high-frequency and high-precision voltage sensorsa kind ofUsing the principle of closed-loop flux gatetakeTested voltageconvert toFollowing the output in proportion to the primary voltageVoltagesignalThemeasuring module，The high insulation between the primary and secondary edges has the characteristics of high precision, high linearity, high integration, small size, simple structure, long-term stable operation, and adaptability to various working environments.broadlandApplied in electricitySystem control and testing of electrical equipment in industries such as petroleum, coal mining, chemical, railway, communication, and building automation.

★ AC, DC, and mixed voltage are all acceptablemeasure ★ Soundanswerspeedfast

★High linearity★ Excellent anti-interference ability ★ Highly insulated primary and secondary edges

★ Suitable for high-frequency voltage signals

2.Selection information(See the image on the right)

Rated measurement:

2000Vrms

ratedOutput:

O10:±10V

power supplyPower Supply:

P1:±15Vdc

3.electrical parameter

4.General parameters:

5. Structural diagram

6．Wiring diagram

7.Output curve

8.Safety precautions

1. Pay attention to the wiring terminals when wiringThe exposed conductive parts of the product should be protected from ESD impact as much as possible, and engineers with professional construction experience are required to perform wiring operations on the product. The connecting wires of the power supply, input, and output must be connected correctly and cannot be misplaced or reversed, otherwise it may cause product damage.

2. The installation and use environment of the product should be free of conductive dust and corrosive Egypt

3. The potential installed on the product; Used for internal debugging and calibration within the company, it cannot be adjusted by the user.

4. Severe vibration or high temperature may also cause product damage, please pay attention to the usage situation.

1. Please be aware of the risk of electric shock. After installation, operators should not touch any exposed conductive parts. If necessary, sensors can be protected by adding protective covers.

Note: 1. Our company has the right to interpret this manual. If you have any objections, please contact our technical support.

2. This manual will be updated regularly. Please keep an eye on our company website without prior notice.