FLUKE DTX-1800 Series Cable Certification Analyzer - Wiring Certification Testing Expert
The Fluke DTX series [Fluke DTX1200/Fluke DTX1800/Fluke DTX-LT] cable certification analyzer greatly shortens the certification testing time. UKE DTX Series Cable Certification Analyzer - Wiring Certification Testing Expert

The Fluke DTX series cable certification analyzer newly launched by Fluke Network Company is a high-tech testing platform that can meet current requirements while facing future technological development. By improving the performance of each link in the testing process, this innovative testing platform greatly shortens the entire certification testing time.

The time to complete a Category 6 link automatic test is three times faster than other instruments - five times faster when conducting fiber optic cable certification testing. And these are just the beginning. The Fluke DTX series also has IV level accuracy, unparalleled intelligent fault diagnosis capabilities, 900MHz testing bandwidth, 12 hours of battery life, and fast instrument settings, and can generate detailed Chinese graphical test reports. With the help of Fluke DTX series testers, you have the best tool to solve problems and are prepared to face any future challenges. Fluke DTX series cable certification analyzer - time is * *!

Characteristics

Fluke DTX Upgrade Options
Fluke DTX [Fluke DTX1200(Fluke DTX-1200)/Fluke DTX1800(Fluke DTX-1800)/Fluke DTX LT(Fluke DTX-LT(Fluke DTX LT))] The series cable certification analyzer protects your investment and meets future needs. You can easily upgrade from any module to a higher performance module, including Fluke DTX-1800.

Upgrade Fluke DTX1200 to Fluke DTX-1800
If you have purchased Fluke DTX-1200, you can upgrade to Fluke DTX-1800 (Fluke DTX1800) by using the Fluke DTX-1218U upgrade package. The host and intelligent remote are upgraded simultaneously, and the testing frequency can reach 900MHz after the upgrade. Combined with the optional Class F long-term link and channel adapter, it has the testing capability of Class F; These adapters are not included in the upgrade package. The package includes a 16MB MMC card and a serial computer interface cable (IEEE 1394 connector to DB9).

Upgrade Fluke DTX-LT to Fluke DTX-1800
If you have purchased Fluke DTX-LT, you can upgrade to Fluke DTX-1800 by using the Fluke DTX-LT 180 upgrade package. The host and intelligent remote are upgraded simultaneously, and the testing frequency can reach 900MHz after the upgrade. Combined with the optional Class F long-term link and channel adapter, it has the testing capability of Class F; These adapters are not included in the upgrade package. Automatic testing of Cat 6/Class E links can be completed within 12 seconds after upgrading. The package includes a Cat 6/Class E channel adapter (1), a removable memory interface card, a 16MB MMC card, a serial computer interface cable (IEEE 1394 connector to DB9), and a session headset.

Upgrade Fluke DTX-LT to Fluke DTX1200
If you have purchased Fluke DTX-LT, you can upgrade to Fluke DTX1200 by using the Fluke DTX-LT 12U upgrade package. The host and intelligent remote are upgraded simultaneously, and automatic testing of Cat 6/Class E links can be completed within 12 seconds after the upgrade. The package includes a Cat 6/Class E channel adapter (1), a removable memory interface card, a 16MB MMC card, a serial computer interface cable (IEEE 1394 connector to DB9), and a session headset.

All upgrade packages come with an upgrade guide that includes information to contact Fluke Networks and upgrade your tester at an authorized repair station. Technicians will upgrade your host and remote end and return it to you.

High speed fiber optic cable certification testing
Single key switch between twisted pair and fiber optic cable testing

Only the optional fiber optic module provided by the Fluke DTX platform allows you to never waste time searching for fiber optic adapters. The certification testing of optical cables can be conducted at any time.

The fiber optic module of the Fluke DTX series tester shortens testing time through its unique technology and easy-to-use interface. Pressing the auto test button will automatically perform certification that meets the standards - two optical cables will be tested simultaneously on two wavelengths. Also measure the length and determine whether the test passes or not - all tests are completed within 12 seconds. Our fiber optic testing module can complete more tests in a shorter amount of time, reducing testing costs while giving you more time to do other work. It is easy to reduce testing time by over 100 hours per year.

Provide complete top-notch certified FLUKE DTX series cable certification analyzer - wiring certification testing expert

Our top-notch certification testing includes loss, length, and polarity testing. You can confirm the performance and installation quality of the fiber optic cable link. Measure the loss of optical cables at multiple wavelengths, measure the length of optical cables, and verify their polarity. You can perform bidirectional testing on two fiber optic cable links without switching the location of the host and remote end, which is only available with testing instruments from Fluke Networks.

Unlike other fiber optic cable testing adapters that can only perform length and two loss measurements during each automatic test, the Fluke DTX series tester's fiber optic cable adapter is the only testing solution that can complete length and four loss measurements in one automatic test - in just 12 seconds. In fiber optic cable testing, you can achieve speeds up to 5 times faster than other solutions.

Copper and fiber optic cable certification testing kit
If you need to conduct certification tests on both twisted pair copper cables and optical cables, we can provide you with a package. These packages bundle the Fluke DTX series cable certification analyzer with fiber optic modules, allowing you to perform certification testing on both copper and fiber optic cables simultaneously

If the above package does not fully meet your needs, you can choose to purchase the Fluke DTX series cable certification analyzer and Fluke DTX series cable testing module separately.

Using LinkWare cable testing management software saves time in managing test results
The Fluke DTX series cable certification analyzer includes the powerful LinkWare cable management software from Fluke Network, which can help you quickly organize, edit, view, print, save, or archive test results through work locations, users, buildings, and more. You can merge the test results into an existing database and sort, search, or organize them by any data field or parameter.

You can download LinkWare software for free from our website. Once you have completed your work, you can submit this powerful application to your users so that they can immediately access electronic data. You can also export the data as Adobe PDF files.

LinkWare software's extensive data management capabilities:

• Use a single software to manage copper and fiber optic cable test results, supporting the Fluke network full line cable tester
• Obtain professional graphical test reports in a universal format for all Fluke network cable testers
• Ensure compliance with the standards for configuring and printing TIA 606-A documents
• The new drag and drop feature makes it easier to manage and organize multiple projects, and is compatible with powerful CMS cable management software
• The simple user interface and time-saving features improve productivity, making it the world's preferred cable testing management software
• The LinkWare software provides a colorful and graphical description of the tested parameters, allowing for the printing of professional and graphical test reports. You can choose which parameters to print and the order in which graphics are displayed. You can customize the company logo on the report.

The new LinkWare Stats report statistics option provides graphical analysis of all your cable equipment

LinkWare now supports LinkWare Stats report statistics software, which is a new automatic statistical report option that can help you move above and beyond the page per link report to view your entire cable structure. It analyzes and converts LinkWare cable test data into graphics, presenting the aggregated performance of cable equipment in the entire cable structure in a compact and graphical format, allowing you to easily verify boundaries and detect anomalies.

See how LinkWare Stats processes your data - LinkWare Cable Management software includes a free demo version of LinkWare Stats.

*Quick certification testing solution
6 types of automatic tests in 12 seconds
Three times faster than other testers

Grade IV accuracy
Exceeding the requirements of Category 6 and higher standard indicators

Advanced and rapid fault diagnosis technology
**Identify any faults at any location in the link and provide the correct method to assist you in troubleshooting.

Long term link adapter suitable for on-site environment
Provide high repeatability testing accuracy and compatibility with Class 6 systems

12 hours of battery usage time
Lithium ion batteries provide power for a whole day's work

Ready to use fiber optic cable modules at any time
The Fluke DTX series' back inserted fiber optic module slots provide protection for optional fiber optic modules

12 second automatic testing of optical cables
Simultaneously conducting certification tests for dual fiber cables and dual wavelengths

Internal memory
Can save 6 types of link test reports in over 250 graphic formats or 2000 text formats

memory card
Used for fast data processing - a 16MB storage card can hold 300 graphic format Category 6 link test reports

Test bandwidth up to 900MHz
Support video transmission, Class F or 10 Gigabit Ethernet applications

Color large screen display
Equipped with high brightness background light, easy to observe test result data

USB port
Can download test data at high speed

Store the test results of full graph visualization
It can be downloaded to a PC using LinkWare software from Fluke Network Company

Lightweight and portable, ergonomically designed
Very suitable for on-site use

Built in intercom function
Enable you and your companions to communicate at both ends of the link via twisted pair or fiber optic cable

The rotary switch is easy to learn and master, and the operation is simple
You are always aware of the selected testing mode

Durable protective sheath
Can meet the usage requirements of various on-site environments

Greatly reduces the time for certification testing
The Fluke DTX series digital cable analyzer provides you with a complete testing solution that makes every aspect of certification testing simple and orderly - including every stage from setup to rapid testing and fault diagnosis, to generating test reports. In short, the Fluke DTX series can save you a lot of time and money - up to 4 hours per day.

Complete 6 types of link testing within 12 seconds

The Fluke DTX-1200 and Fluke DTX-1800 (Fluke DTX1800) can complete testing of 6 types of links in 12 seconds - not only fully meeting current international standards, but also having ultra-high testing accuracy, which is three times faster than existing testers. This incredible speed means you can test over 170 more links in * * 8 hours of work time.

Fault diagnosis is twice as fast

When a link has a fault, the Fluke DTX series tester can provide a quick and easy to understand way to indicate the exact location of the fault (distance from the fault point to the tester) and the possible causes of the fault.

These prompt messages not only tell you what malfunction has occurred, but also provide you with the correct method to quickly solve the problem - so you don't have to spend time consulting with project managers There is no need to waste time experimenting, exploring troubleshooting methods, or retesting to determine if the problem has been resolved - testers can clearly know where the problem occurred in the faulty link and what needs to be done to troubleshoot.

Save time outside of the testing phase

The Fluke DTX series tester not only has fast testing speed, but also reduces the time required for setup and report generation. Its simple and easy-to-use features reduce training time; Longer battery life means that after one charge, you can conduct more tests; The bright color display screen, large capacity memory, and built-in walkie talkie, combined with the practical testing experience accumulated by users, all contribute to improving overall testing efficiency. In daily testing work, the Fluke DTX series unknowingly saves you time and money.

Long term link testing adapter technology reduces misjudgments
Commercial jumpers, including Category 5e, 6, and even 7, if used directly for testing long-term links, can cause misjudgments of many qualified links, wasting a lot of time on diagnosing faults and repeating tests. Due to the repeated curling and unfolding of jumpers, as well as daily wear and tear caused by careless storage in the field environment, their performance will continuously decrease over time, which obviously affects the return loss. These are usually the reasons for testing failure.

At Fluke Networks, we guarantee to prioritize testing accuracy. This is why we are developing high-performance long-term link testing adapters to replace commercial jumpers. Our unique technology ensures higher accuracy and stability in measuring return loss, while also improving the accuracy of all other testing parameters - not just the precision of a single test, but the precision of each test - long-term precision.

From the figure, you can see that a commercial Class 7 SSTP jumper will have a loss of 10dB after 150 curling and unfolding cycles. This 10dB loss will cause qualified links to be misjudged as unqualified - you have obtained a false unqualified result. If you are using a long-term link adapter from Fluke Networks, this situation will not occur - the Fluke DTX series tester will bring you unquestionable repeatability accuracy.

Wiring manufacturer approval
Manufacturer approval is necessary when deciding on testing methods. With the manufacturer's guarantee, you should use recognized testing tools and conduct certification testing to ensure the satisfaction of your users. customers' complete satisfaction.

The Fluke DTX series cable certification analyzer from Fluke Networks has undergone rigorous testing in the laboratory by some industry-leading cabling manufacturers. Click on the manufacturer's logo below to display the approval letter.

900MHz testing frequency for future needs
The superior model of Fluke DTX series cable certification analyzer - Fluke DTX-1800 (Fluke DTX1800) - supports testing frequencies up to 900MHz. This high bandwidth supports the requirements of ISO Class F links and meets the twisted pair testing for running 10 Gigabit Ethernet. It can also help you authenticate other link applications, such as video transmission on twisted pair cabling systems. There is no other test in the market that can meet the requirements of Category 5e and Category 6 testing while also protecting your investment to meet future needs.

Testing instrument accuracy exceeding level IV
So far, testers have been designed to meet the requirements of Level III accuracy. ISO/IEC (International Standard) requires Class F links to be tested up to 600MHz and requires testers to meet Class IV accuracy. The Fluke DTX series meets and exceeds this requirement, ensuring higher reliability of your test results across the entire frequency range.

The cost of not testing:

Incorrect pass/fail judgments displayed by the tester can result in the determination of qualified links as unqualified, or the determination of unqualified links as qualified. Both of these situations will waste a lot of your time and money.

Fault diagnosis is twice as fast
When a link has a fault, the Fluke DTX series tester can provide a quick and easy to understand way to indicate the exact location of the fault (distance from the fault point to the tester) and the possible causes of the fault.

These prompt messages not only tell you what malfunction has occurred, but also provide you with the correct method to quickly solve the problem - so you don't have to spend time consulting with project managers. There is no need to waste time experimenting, exploring troubleshooting methods, or retesting to determine if the problem has been resolved - testers can clearly know where the problem occurred in the faulty link and what needs to be done to troubleshoot.

Even if only 2% of the tested links have problems in * *'s work, you can save 2 hours of time.
VisiVault Technical Specifications

option

• Added fast recording capability for fiber optic cable certification and fault location to Fluke DTX series cable certification analyzer
• 12 second automatic testing is 5 times faster than existing instruments
• Ready to use back inserted fiber optic cable module
• The built-in Visual Fault Locator (VFL) can locate optical cables, verify connectivity and polarity, and detect breakpoints
• Improve testing speed through functions such as walkie talkie, fiber optic cable search, monitoring, bidirectional testing, and single fiber optic cable testing
• Provide Level 1 fiber optic cable certification test report through LinkWare software
• Test more optical cables in a shorter amount of time, saving over 100 hours of work time annually
  Product features
  Ready to use fiber optic modules to test more cables in a shorter amount of time

  In today's high-speed data networks, there is a demand for fiber optic cable and twisted pair cabling systems. Therefore, to ensure correct installation quality, certification testing and document filing for various media have become very important.

  Now, with the newly launched FLUKE DTX-1800 series cable certification analyzer from Fluke Networks, you can accurately certify copper and fiber optic cabling systems. Only the Fluke DTX series cable analyzer can provide optional back inserted fiber optic cable modules. These modules are more convenient than other fiber optic testing solutions and include more functions, including testing and diagnosis of dual fiber optic cables and dual wavelengths, as well as integrating a visual fault locator (VFL). No other tester can switch between testing fiber optic cables and copper cables with just one button press. Not only can you authenticate optical and copper cables simultaneously, but you can also test them faster and more efficiently at unimaginable speeds.
  

  Jumper testing solution（Fluke DTX-PCU6S)

  • New jumper testing solution for Fluke DTX and DSP series cable certification analyzers
  • Quickly verify whether the jumper meets the new TIA 568B/ISO standards
  • Check the previous jumpers and isolate the network performance degradation caused by faulty jumpers
  • Test jumpers to ensure optimal network performance and greater system margin for the entire channel
  • Reduce errors in high-quality applications. These applications use multi pair and one pair bidirectional transmission
  • Durable and sturdy, with reliable performance
  • 70% of Cat5e/6 jumpers cannot meet the requirements of TIA standards

    Product features
    Fast, efficient, and convenient testing of weak links in the testing chain

    The new and stricter TIA standards, as well as the Cat 5e/Class D and Cat 6/Class E high-speed data cable systems, have higher requirements for jumpers than ever before. Now Fluke Network provides convenient jumper testing methods. Simply connect the sturdy and compact jumper testing adapter to the DSP-4X00 cable analyzer or Fluke DTX series cable certification analyzer and download the testing database, and you have a high-speed, fully automatic, TIA compliant jumper testing method. Improving bit error rate, increasing channel throughput, increasing system margin, and reducing network downtime - you will receive high returns - this is the Network SuperVision from Fluke.
    

    General indicators
    
    The jumper test adapter meets the TIA/EIA-568-B.2-1 and IEC 61935-2 standards for Cat 6 jumpers. The DSP jumper test adapter consists of two adapters, one connected to the host of the DSP4X00 tester and the other connected to the remote end. The sockets of these test adapters meet the standard requirements of TIA/EIA-568-B.2-1.

    test parameters

    • Wiring diagram to ensure correct termination
    • Near end crosstalk (NEXT) (unidirectional)
    • Return loss (unidirectional)

    Pass/fail test limit

    The jumper test database includes pass/fail test limits, and its standards are:

    • TIA/EIA-568-B.2-1, Cat 5e and Cat 6
    • ISO/IEC 11801-2002 Cat 5 and Cat 6

    The jumper testing database includes the following length limits: 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 7.5, 10, 15, and 20 meters.

    measurement accuracy

    The measurement accuracy is calculated based on the guiding principles of standard TIA/EIA-568-B.2-1 and IEC 61935-1s. The typical accuracy is based on the obtained performance parameter data and is significantly better than the requirement of third level accuracy. It does not include performance changes caused by changes in the test adapter.