VIP member
FLOM - Laboratory Vessel Cleaning Agent
Product performance: 1. Colorless to yellowish transparent liquid 2. PH value (stock solution) is 11.0-12.53. This product does not contain phosphorus
Product details
Introduction to Immersion Cleaning Agent:
|
Product Name |
Laboratory utensil specific cleaning agent -A155 (alkaline)/NA2 (acidic) |
|
main ingredients |
Deionized water, high-efficiency surfactant, solubilizer, green chelating agent, inorganic base |
|
Product features |
Colorless to yellowish transparent liquid, PH value (stock solution) is 11.0-12.5, this product does not contain phosphorus, chlorine, pigment, essence, and is efficient and easy to rinse |
|
Scope of Application |
This product is a concentrated alkaline cleaning solution, specifically designed for soaking laboratory glasswareUsed for pre-treatment soaking before glassware cleaning machineSuitable for various stubborn stains in the laboratory, especially for synthetic reaction residue, residue after traditional Chinese medicine extraction, mineral oil, various oils and cosmetics stains, etc., which can be easily removed; This product is a green formula with good biodegradability, free of EDTA, phosphorus, chlorine, etc., and environmentally friendly. |
|
Precautions |
This product is alkaline and suitable for laboratory glass, ceramics, and stainless steel. Not suitable for cleaning aluminum, zinc, non-ferrous metals, latex, polycarbonate products. For materials not mentioned, please conduct material compatibility tests in advance. When using this product, please wear chemical safety goggles and rubber gloves. If detergent accidentally splashes into the eyes, immediately rinse with plenty of water and seek medical attention promptly. |
|
Storage conditions |
This product should be stored in high-density polyethylene plastic or stainless steel containers, sealed in a cool and dry place, and avoid contact with acidic substances |
|
Validity period |
2 years |
|
Specifications |
5 liters/barrel, 2 liters/barrel |
Usage:
●Dilute this product10 times is used to soak various glassware. After soaking for 2-5 hours, it can be directly cleaned. For particularly stubborn residues, the dilution ratio can be appropriately reduced.
●For stubborn stainsSoak in cleaning solution for 2-24 hours, depending on the hardness and degree of immersion.
●Heating soaking solution(40-50 ℃) or using ultrasonic cleaning can greatly shorten the cleaning time
●It is recommended to rinse the soaked vessels repeatedly with running tap waterRinse at least 5 times with deionized water or distilled water for at least 3 times.
●Using a glassware cleaning machine to clean soaked glassware can effectively reduce energy consumption and improve efficiency, resulting in better results.
●The soaking solution can be reused. After the failure of the foaming solutionAdd an appropriate amount of organic acid for neutralization before discharge.
●Please use covered high-density polyethylene plastic or stainless steel containers for soaking.
●After removing the cleaning material from the solutionIt should be thoroughly rinsed immediately. Do not let the cleaning material sit for too long before rinsing.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-