High precision;

Good stability;

Intelligent HART fieldbus protocol;

※ Small, lightweight, sturdy and vibration resistant;

※ Range and zero point can be continuously adjusted externally;

※ Adjustable damping;

Good one-way overload protection characteristics;

※ No mechanical movable parts, low maintenance workload;

The entire series has a unified structure and strong interchangeability of components;

Explosion proof structure, all-weather use;

The membrane material that comes into contact with the medium can be selected; The membrane can be made of corrosion-resistant materials such as 316L, TAN, HAS-C, MONEL, etc;

※technical indicators

● Target audience

liquid

● Measurement range

0-1.3 kPa to 0-6890 kPa

● Output

4～20mADC， Intelligent HART fieldbus protocol signal output

● Power supply

24V DC， Can operate at 12V DC (with LCD display minimum 15VDC), up to 45V DC

Positive and negative transfer

Regardless of the output, after positive and negative migration, the upper and lower limits of the range must not exceed the limit of the range

Maximum migration amount: 500% of the minimum calibration range

Maximum negative transfer: 600% of the minimum calibration range

● Temperature range

Storage temperature: -40 to+100 ℃

Amplifier operating temperature range (ambient temperature): -30 to+70 ℃

Working temperature (medium temperature) of silicone oil filled measuring element: -40 to+149 ℃

● Humidity range

Relative humidity is 1-100%

● Sensor volume change

Less than 0.16cm³

● Indicator table

(On site) pointer type; digital display

Explosion proof type

Explosion proof ExdIICT6; Intrinsic safety ExiaICT6

● Range and zero point

External continuous adjustable

● Overpressure limit

Application range below 6MPa: 0 (absolute pressure) to 14MPa

● Damping

Continuously adjustable between 0.2 and 16 seconds

● Start time

2 seconds, no preheating required

※performance metrics

● Accuracy

±0.5％

● Stability

＜ ± 0.25% FS/year

● Temperature impact

≤± 0.60% (change every 28 ℃ at maximum range)

● Static pressure influence

≤± 0.60% (at maximum range)

● Vibration impact

In any axial direction, with a frequency of 200Hz, the error caused is less than ± 0.05% of the maximum range, and the range code 2 (micro differential pressure) is ± 0.25%

● Power supply impact

Less than 0.005%/V of the output range

● Load impact

When the power supply is stable, there is no load impact

● Installation location impact

The maximum zero point error that can be generated is 0.24 kPa, but it can be calibrated and has no impact on the measurement range

※performance metrics

● Structural materials

Isolation membrane: 316 stainless steel, Hastelloy C, Monel alloy, Tantalum

O-ring (medium contact area): Fluororubber, PTFE

Flanges and bolts: 316 stainless steel.

Filling fluid: silicone oil or inert oil

Electrical casing: polyurethane baked paint low copper cast aluminum alloy

Bolt: Stainless steel

● Pressure connector

The connecting screw hole on the pressure chamber is 1/4NPT, and the connecting screw hole on the impulse joint is 1/2NPT. The center distance is shown in the external dimension drawings of various models

The signal cable connection screw hole is M20 × 1.5

● Shell protection level

IP65

● Weight

3.9kg (excluding options, except for flanged transmitters)