ethaneMagnetic flap level gaugeIntroduction:

The UHZ magnetic flap level gauge is a new generation of magnetic flap level gauge innovatively designed by Wuxi Fanyi Instrument. The product technology and structure are reasonable, and the display is clear and intuitive. It consists of a body, flap box (composed of red and white dual color magnetic flap plates), float, flange cover, etc., and is used for level measurement of various liquid containers. There are also magnetic floats inside the main body that move up and down with the rise and fall of the liquid level, while driving the dual color magnetic plate inside the external indicator of the main body to flip. When there is a liquid level, it turns red, and when there is no liquid level, it turns white. The boundary between red and white represents the liquid level height. This makes the liquid level indication appear clearer. It can be used for on-site or remote display and control of liquid level in high-temperature, explosion-proof, anti-corrosion, food and beverage, and other occasions. The UHZ series products can achieve high sealing, leak prevention, and reliable measurement of liquid level under high temperature, high pressure, high viscosity, and strong corrosive conditions. The entire measurement process has no blind spots, eye-catching display, intuitive readings, and a large measurement range. Equipped with liquid level alarm and control switch, it can achieve upper and lower limit alarm and control of liquid level or boundary. Equipped with liquid level transmitter, it can adjust the liquid level. The boundary signal is converted into a standard signal of 4-20mADC in a two-wire system, enabling remote detection, indication, recording, and control.
The UHZ series magnetic flap level gauge is widely used for level measurement and control in the production processes of industries such as power, petroleum, chemical, metallurgy, environmental protection, shipbuilding, construction, and food.
Main technical parameters of ethane magnetic flap level gauge:
1. Measurement range: 300-15000mm
2. Accuracy: ± 10mm, ± 16mm
3. Column flipping diameter: 10mm, 16mm
4. Working pressure: ≤ 2.5Mpa (juice can be set separately for pressures above 2.5Mpa) Anti corrosion type ≤ 0.6Mpa
5. Medium density (g/cm3): 0.5-2
6. Medium temperature: -20 ℃+250 ℃ (special requirements can reach 450 ℃)
7. Medium viscosity: ≤ 0.4Pa • S. For media with high viscosity or media that are prone to agglomeration at low temperatures, heating jacket liquid level juice can be selected according to user requirements.
8. Environmental vibration: frequency ≤ 25Hz, amplitude ≤ 0.5mm
9. Follow speed: ≤ 0.08m/s
10. Installation methods: side mounted, top mounted, bottom mounted
11. Protection grade J: IP65
12. Explosion proof J: ib Ⅱ CT4 (Ben An type), d Ⅱ BT4 (Explosion proof type)
13. Transmission mode: 4-20mA or switch quantity
14. Connecting flanges: HG20592-20635-97 flange standard. If other flange standards (such as GB, ANSI, DIN, etc.) are used, please indicate when placing an order. For the connection flange of high-pressure side mounted magnetic level gauge, HG20595-97 neck butt welding connection flange DN25, PN6.0 or PNl0Mpa shall be used, and the sealing surface shall be raised or convex. If there are special requirements, they can be specified when ordering.
Selection of ethane magnetic flap level gauge: