Endecots stainless steel mesh from the UK

The sieve is manufactured according to BS EN 9002 (QMAS) standard and can comply with all national standards and regulations;

It is a test filter screen that meets BS 410, ISO3310/1&2, and ASTM 11 standards. After appraisal, it meets the Kitemark standard in the UK;

Measured with computerized optical instruments, the aperture size is very accurate;

Mesh has balanced tension;

The precise sieve frame, embedded strips, and sealed frame ensure that the sample is not lost without cracks;

Specially designed screen frame border for easy handheld use;

The edges of the screen frame have no burrs, ensuring comfort when held in hand;

Each sieve has a Certificate of Compliance and serial number, providing complete tracking services.

Certified test sieve

All test sieves are manufactured according to a national standard or standard, with a Certificate of Compliance and a separate serial number, providing complete tracking services.

Tested sieve mesh

The test sieve is tested according to the procedure listed in section 5.2 of ISO 3310/BS 410. Each sieve is accompanied by a testing certificate that specifies the average value of the sieve holes and the method of using the sieve.

Corrected test sieve

The test sieve is tested and calibrated according to the procedures listed in section 5.2 of ISO 3310/BS 410. Each sieve is accompanied by a calibration certificate that records the number of sieve holes and the measurement results of wire diameter, as well as the average sieve hole size and standard deviation in both warp and weft directions. And indicate the type of weaving. Perforated plate screens can also provide calibration.

Endecots stainless steel mesh from the UK

Woven Wire Mesh Sieve

Widely applicable and suitable for particle size analysis in various laboratories.

Diameter size: The American standard sieve series (ASTM E11:01) has four types: 3 inches, 8 inches, 12 inches, or 18 inches, while the British/standard sieve series (BS.410:2000/ISO 3310:2000) has 38, 100, 150, 200, 250, 300, 315, 350, and 450 millimeters.

The available pore sizes range from 125 millimeters to 20 micrometers. It is divided into two types: full height and half height.

The screen frame material can be selected from copper or stainless steel, and large-diameter screens can also be supplied with electroplated steel materials.

Perforated Plate Sieves

The diameter is divided into 200, 300, 315, 350, 400, and 450 millimeters.

The pore size range is from 125 millimeters to 4 millimeters for square holes and from 125 millimeters to 1 millimeter for circular holes.

The screening frame material can be selected from copper or electroplated steel.

Endecots stainless steel mesh from the UKParameters: