VIP member
Product details
Electromagnetic flowmeter
Product Overview:
Electromagnetic flow meters are widely used to measure the volumetric flow rate of conductive liquids and liquid-solid two-phase liquids. It has no movable parts or throttling components in its measurement, so there is almost no pressure loss or blockage during the measurement. Especially in situations where the pressure is not high in the process pipeline or relies on gravity flow, using an electromagnetic flowmeter is more suitable. Electromagnetic flowmeter has stability, strong anti-interference ability, good interchangeability, overall structure, good moisture and waterproof performance, and is suitable for installation in underground or humid environments. There are no moving parts inside the sensor, and the pressure loss is small. The sensor has a self calibration function and non-linear correction function, and can be set through the serial port for parameters.
Basic parameters:
1Power Supply:220V AC (110VAC~245VAC), 24VDC, 3.6V lithium battery
2. Power consumption: ≤ 20W (matching power consumption);
3. Accuracy level: Level 1 or Level 2 (matching accuracy);
4. Protection level: IP65;
5. Environmental temperature: Class B;
6. Temperature resolution: 0.01 ℃;
7. Optional temperature measurement range: -30 ℃ to 180 ℃;
8. Temperature difference measurement range: 1 ℃ to 90 ℃;
9. Maximum flow reading (m3): 9999999999 (ten digits);
10. Maximum reading of heat (Mwh): 99999999999 (ten digits);
11. Thermal units: kJ, MJ, GJ, kwh, Mwh optional;
12. Analog output: 4-20mA DC/600 load resistance (switchable between thermal and flow parameters);
13. Communication: RS-485, M-BUS, HART, etc. are optional.
14. Caliber range: DN15-DN400
Technical specifications of sensors:
1. Nominal diameter: DN50-DN1400mm;
2. Nominal pressure: 0.6MPa to 4MPa;
3. Lining materials: high temperature resistant rubber, PTFE, PFA, F46, etc;
4. Electrode materials: including molybdenum stainless steel, Hastelloy B, Hastelloy C, titanium, platinum/iridium alloy, tantalum, etc;
5. Structural form: split type, integrated type;
6. Medium temperature: -30 ℃ to 180 ℃;
7. Connection method: flange type.
Technical parameters of temperature sensor:
1. Sensor type: PT1000;
2. Installation method: protective sleeve;
3. Temperature measurement range: -50 ℃ to 200 ℃;
4. Wire length: 0.6m to 15m
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-