|
Screw belt type
|
YT710
Single screw belt type
|
|
0.8
~
0.98
|
<2
|
<100
|
Axial flow pattern. Generally, materials spiral upwards along the container wall and then converge towards the central cavity, forming an upward and downward convective cycle. Suitable for mixing, heat transfer, reaction and dissolution operations of high viscosity or powdery materials. The form and number of layers of the ribbon should be determined based on the geometric shape of the container and the height of the liquid layer. commonlyYT710YT720YT770 mixer is used for flat or oval bottom containers;YT740YT750 mixer is used for 90 ° conical bottom containers;YTThe 760 mixer is used for elliptical bottom containers that need to prevent adhesion at the bottom.YT770YTThe 780 mixer is a centerless shaft type frame belt combination mixer. Due to the intervention of cabinet type mixing effect, the vortex near the screw belt is increased, expanding the mixing range.
In general, for large diameters and liquid layer heights, double screw belts are used, while for small diameters, single screw belts are preferred.
|
|
YT730
Screw type
|
|
0.4~0.5
|
<2
|
<100
|
Axial flow pattern, the material is lifted along the spiral blade of the screw, with one part being thrown out of the screw and the other part being lifted up to form a downward material flow, resulting in continuous diffusion and mixing. When there is a guide vane, it can force the circulation of materials inside and outside the guide vane, and when the viscosity is high, it can play a blending role. Suitable for high viscosity mixing, heat transfer, reaction, and dissolution operations.
|
Introduction to the mixer of dry powder mortar mixer
