VIP member
Desktop manual hot pressing machine QC-601T
Desktop manual hot pressing machine QC-601T
Product details
QC-601TDesktop manual hot press molding machine
Manual Thermos Press Forming
Machine
Machine DescriptionThe machine has two independent heating plates, with different pressures and pressure plate areas selected according to the requirements of the raw materials. Commonly used in the molding of thermoplastic materials, the raw material is placed in a mold, sandwiched between upper and lower hot plates, and the sample is brought into contact with the upper and lower molds. After melting the sample using the mold temperature, a jack is used to apply pressure to shape the raw material, in order to cut the desired shape and test the transparency, impact strength, and tensile strength of the raw material(Pressure)
Strength and other characteristics.
Applicable industriesRubber industry,
plastics industry
Machine appearance gauge
|
grid |
Machine model |
|||
|
QC-601T |
pressure |
2t |
5t |
10t |
|
20t |
||||
|
The pressure is displayed on the pressure gauge and accompanied by a pressure comparison table |
temperaturenormal atmospheric temperature~ 300 |
|||
|
℃ |
Heating and cooling speed30Heating rate:℃200reach℃ 12à Within minutes(Choose a cooling circuit )200Cooling rate:℃60reach℃ 8à |
|||
|
Within minutes |
timer0 ~ 999 |
|||
|
minute |
15 Heating plate size× |
|||
|
15 cm |
Distance between electric heating plates60~120 mm |
|||
|
(Adjustable) |
enclosure |
|||
|
A set of flat test piece molds |
Machine power supplysingle-phase,220V/50Hzor60Hz， |
|||
|
15A |
60 Machine size 35 ×× |
|||
|
75 cm |
machine weight |
|||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-