The MultiTest med. Int compressed air quality detector is used to detect the quality of breathing air supplied by compressors or compression cylinders. The detection system is reliable and meets the purification standard EN12021. All components are packaged in practical packaging and can be used immediately after disassembly. The use of Dr ä ger MultiTest med. Int for pollutant detection and measurement can reliably determine various potential pollutants in compressed air flow. The device is easy to use and fast to measure, and does not require a power supply. Instead, it can be easily connected to the low-pressure compressed air supply system to be monitored using a plug without any problems. The combination of medical gas detectors and Delger detection tubes can detect various substances in compressed air, such as nitrogen oxides, carbon dioxide, and oxygen. The Delger detection tube can be used independently for qualitative detection of water vapor, oil, CO2, SO2, H2S, NOX, CO, and other pollutants in medical gases, and can also be used for simultaneous detection. The detector can be connected to various types of quick plug interfaces, and the quick inspection function can provide accurate measurement results and display pollution levels in just five minutes.

Main application areas

Pharmaceutical industry, fire protection industry, spray painting industry, aerospace industry, electronic manufacturing industry, petrochemical industry, etc

Technical parameters:

Suitcase: 400mm in length, 300mm in width, and 91mm in height
Weight: 3 kilograms
Work pressure: 3-20 bar in accordance with DIN13260 standard
Interface: Quick plug interface G1/4“
Flow rate: 0.2 liters/minute and 4.0 liters/minute

MultiTest med. Int. ordering information:

Supporting supplies

Attention:

• The oil detection box and detection tube must be used within the designated detection tube channel to ensure accurate measurement.

• When using a detection tube, ensure that the direction of flow is correct.

• Do not breathe during measurement.

• After cleaning the measuring equipment, please ensure that each measuring unit is installed back to its corresponding connection position.

• The instrument must be regularly inspected and maintained by professional technicians and recorded.

• The maintenance work of the instrument needs to be carried out by trained service personnel.

• Only use original Delger parts for repairs.

• All components must be stored in a dry, cool, dust-free location, ensuring no direct sunlight or heating.

• Physical display