As a mature product, the Delger Aerotest HP compressed air quality detector has extraordinary advantages in detecting the quality of high-pressure compressed air, and can detect oil aerosols in high-pressure compressed air. This system can not only detect regular oil quality, but also synthetic oil that is independent of oil type and viscosity. In addition, Aerotest HP can also detect the levels of carbon monoxide, carbon dioxide, and water vapor in high-pressure compressed air. The Delger compressed air quality tester has a moderate weight, is easy to carry, and is also very convenient to use.

The advantages of the Delger Aerotest HP compressed air quality tester are as follows:

1、 Detect breathing air
With the Delger AerotestSimultan HP compressed air quality tester, you can detect the quality of breathing air supplied by the compressor or compression cylinder. This detection system ensures reliable detection and complies with the purification standard EN12021.
2、 Pollutant detection and measurement
It can quantitatively detect various potential harmful substances, such as carbon monoxide, carbon dioxide, water vapor, and oil in diffused compressed air. The measured values can be determined simultaneously or separately.
3、 Quick and simple application
With the help of commonly used tools, this measuring device can be connected to the high-pressure air network through the G5/8 'interface. The quick check function ensures accurate measurement results and provides corresponding pollution level information within five minutes.
4、 Delger oil detection box
The development of the new Delger oil detection box is specifically designed to detect and check for oil mist in compressed air. In addition to commonly used oils, it is now possible to detect synthetic oils regardless of type or viscosity. The wide measurement range (with proportional conversion) ensures accurate reading of numerical values.
5、 Compressed air quality tester
Unqualified compressed air can threaten human health and life. The product is used to detect the quality of compressed air in gas cylinders or compressed air pipelines.
Easy to use, no need for power supply, can quickly detect harmful substances in gas (within 5 minutes).
Main detection indicators: CO, CO2, oil, and water vapor. Can independently detect the filter inside the inflation pump.

Features of the Delger Aerotest HP Compressed Air Quality Tester:

Used to detect the quality of high-pressure compressed air for breathing. According to appropriate purification standards, quantitative analysis of pollutants in compressed air can detect the quality of breathing air. Can meet the requirements of different standards (such as DIN3188 standard).
Quick detection: measurement time is 5 minutes
High precision:
The interface of Aerotest Simulator HP is G5/8 or INT, which can be connected to high-pressure compressed air supply systems.
All components of Aerotest Simulator HP can be packed into a hard suitcase for easy carrying and operation.

Technical parameters of the Delger Aerotest HP compressed air quality tester:
Dimensions (length x width x height): 350 x 300 x 85mm
Weight: Approximately 3KG
Gas supply pressure: 200/300 bar
Connection: G5/8
Order information for Delger compressed air quality tester:

Aerotest Simulator HP complete configuration: 6525951

-1. Pressure reducing valve

-1 flow regulator that can simultaneously install 4 detection tubes
-1 timer
-1 pipe opener
-1 user manual
-1 suitcase
1 box of 10 detection tubes: carbon dioxide
1 box of 10 detection tubes: carbon monoxide
1 box of 10 detection tubes: oil
1 box of 10 detection tubes: water vapor
AerotestSimulatnHP's testing tube:
1 box of 10 detection tubes, carbon dioxide (100-3000ppm)
1 box of 10 detection tubes, carbon monoxide (5-150ppm)
1 box of 10 detection tubes, oil (0.1-1.0mg/cubic meter)
1 box of 10 detection tubes, steam (2-450mg/cubic meter); 20-500mg/cubic meter)

Physical display