Name: DS1/DS2 series servo press machine
Brand: Wode Precision Machinery (China) Co., Ltd
Availability: InStock

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

Wode Industrial Park, Picheng, Danyang, Jiangsu, China

Contact Now

DS1/DS2 series servo press machine

Contact Supplier

More Products

Product details

Advantages of servo presses over traditional presses:

The speed during the processing can be set and changed arbitrarily, and the ease of production is unparalleled.

Compared with traditional presses, the production efficiency can be significantly improved by increasing the return speed.

The travel height and motion sequence can be programmed, thus providing production flexibility.

Optimize the motion sequence to improve and extend the quality of components and the lifespan of molds.

Efficient driving solutions reduce energy consumption.

Compared with traditional presses, there are fewer mechanical components and easier maintenance.

Equipped with a handwheel fine adjustment function can significantly shorten the trial molding time.

HMI human-machine interface function:

Motion curve planning for servo presses (crankshaft mode, multi link mode, holding pressure mode, single-sided mode, pendulum mode, silent punching mode, repetitive pressure mode, free programming mode).

The production process status detection, production volume presetting, and counting of servo presses.

Real time display of motor torque curve, crankshaft angle, slider displacement, etc.

The management system of the mold library requires the recipe function of big data.

Black box function: It can record the core data of the main transmission in real time when the equipment fails, which is convenient for maintenance.

Sliding block operation mode:

The usual crankshaft operating mode.

Any linkage operation mode.

Perform a short stroke repetitive pressurization mode near the bottom dead center.

The mode of low-speed material dropping processing near the bottom dead center is used to reduce processing noise.

The pressure holding mode where the pressure stops near the bottom dead center.

Easy to implement a mode of motion control with the feeding device.

Find the appropriate stamping operation mode through trial punching.

The control function of instantaneous energy release during processing.

Standard technical parameters of DS1 servo press:

Technical Parameter		unit	Equipment model
Technical Parameter		unit	DS1-80	DS1-100	DS1-125	DS1-160	DS1-200	DS1-250
Nominal force		KN	800	1000	1250	1600	2000	2500
Nominal force travel		mm	4	4	5	6	6	6
Slide stroke		mm	160	180	180	200	200	220
Number of trips without load		mm	~50	~45	~35	~35	~30	~30
Large mold height		mm	320	330	350	400	450	500
Adjustment of mold height		mm	80	90	90	100	110	120
Distance from the center of the slider to the body		mm	310	330	350	400	430	450
Distance between columns		mm	730	850	870	950	1130	1220
Bottom size of slider	Left and right	mm	540	620	620	700	880	950
Bottom size of slider	Before and after	mm	460	520	520	580	650	700
Mold handle hole size	Diameter	mm	50	70	70	70	70	70
Mold handle hole size	Depth	mm	70	80	90	100	100	130
Workbench size	Left and right	mm	950	1060	1100	1175	1390	1500
	Before and after	mm	600	640	680	760	840	880
	Material drop hole	mm	180	180	200	200	250	270
The distance between the workbench and the ground		mm	900	900	900	900	1000	1000

DS2 servo press standard technical parameters:

Technical parameters		unit	Equipment model
Technical parameters		unit	DS2-200	DS2-250	DS2-315	DS2-400	DS2-500	DS2-630
Nominal force		KN	2000	2500	3150	4000	5000	6300
Nominal force travel		mm	6	6	7	8	10	12
Slide stroke		mm	200	200	220	250	280	350
Number of trips without load		min^-1	~45	~40	~35	~30	~25	~20
Large mold height		mm	600	650	700	700	750	800
Adjustment of mold height		mm	100	100	120	120	150	150
Distance between columns		mm	2600	2700	2800	2950	3300	3500
Bottom size of slider	Left and right	mm	2200	2300	2400	2500	2800	3000
Bottom size of slider	Before and after	mm	800	900	900	900	1000	1100
Workbench size	Left and right	mm	2500	2600	2700	2800	3100	3300
Workbench size	Before and after	mm	900	1000	1000	1000	1100	1200
The distance between the workbench and the ground		mm	1150	1250	1300	1350	1380	1400

Standard configuration:

Electric concentrated oil lubrication device
(Optional electric thin oil lubrication device)
DS1/DS2系列伺服压力机

Photoelectric protection device

Manual thin oil lubrication device

Sliding block and upper mold balancing device

Misdelivery of inspection interface

Touch Screen

Electronic crankshaft angle indicator

Servo control system

Electric slider adjustment device

Programmable controller

Upper material removal device of slider

Air source quick connector

Shock-absorbing pad

Work light

Air blowing material

Pre adjustment counter (touch screen display)

Select configuration:

Air cushion device (currently available in piston type and skin bag type)

Quick mold changing device (Jinan Jinzan or Xuzhou Hengduan, if customers have special requirements, please specify the manufacturer)

output shaft
DS1/DS2系列伺服压力机

Upper material removal device of slider

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content