SDK-50BDK-50B dual color metal engraving machine/detailed information of engraving machine:

Supply Dingsheng SDK-50B engraving machine

Bicolor metal engraving machine is an engraving instrument produced according to user requirements, which can be used in black and white colors to engrave characters on fixtures, knives, gauges, molds, mechanical parts, and instruments
Numbering, engraving (drawing) lines, and various patterns are widely used in industrial and mining enterprises, scientific research, metrology, material management, and other departments. This machine has a beautiful appearance, small size, light weight, and is easy to carry and use. During electroplating, the small amount of heat generated ensures that the workpiece does not deform. The depth and thickness of the engraved lines can be adjusted, and the handwriting and lines are uniform and clear.

Technical indicators:
Input voltage:~220V/50HZ
Maximum power consumption:<50W
Dimensions: 180 * 125 * 75mm
Can be equipped with pen tips: Φ 0.3mm, Φ 0.5mm
Net weight: 1.4KG
Usage method
The surface of the engraved piece (metal material) must not have oil stains and must be cleaned to ensure good contact;
After selecting the desired color, insert the red line into the tail of the pen, clamp the engraved part with the black line clip, make good contact with the engraved part, and turn on the power;

When operating, the electric engraving pen should be kept in a basic vertical position with the engraved object, and the tip of the nose should slowly move in contact with the engraved object, gradually adjusting the output from small to large to make the graphic lines clear;
4. The pen tip is prone to forming an oxide layer during use, so simply wipe it gently with fine sandpaper and continue to use;
When replacing the pen tip, please insert the circular pin into the small hole of the pen tip and loosen or tighten the nut.
Precautions
When using, a single-phase 3-wire power socket should be selected with good grounding measures.
When not in use, be sure not to place the engraving pen on the workpiece to avoid short circuits and burning out the engraving pen! Please turn off the device at any time.
When the engraving pen is short circuited, the instrument will emit a continuous buzzing sound to prompt the user to promptly eliminate the short circuit phenomenon.
Please do not open the machine without authorization. The circuit board has a voltage of 220 volts to avoid electric shock and personal injury.
Indicator light specification: 6.3V, 3W, furnace mouth electric bead

Bicolor metal engraving machine