Fully CNC servo closed-loop high-speed perforating machine series

		SWSK-DD703
XY axis travel		350X450
Workbench size		1040x550
X. Y, Z axis		Three-axis numerical control Three axis digital display Depth setting function One click start Touch screen control
Clamping electrode diameter		0.15-3.0mm
Maximum drilling depth		300mm
Spindle head travel		300mm
Spindle servo stroke		350mm
Main axis (Z-axis)		Four Taiwan Shangyin linear guides
Z-axis		Japanese Sanyo servo motor, automatic lifting
X. Y-axis guide rail		Taiwan Shangyin Linear Guide
Screw rod		Northern Machinery Double Nut Precision Screw Rod
Rotating head		Taiwan original self-locking
Three axis drive mode		Servo closed-loop motor drive
Programming input CAD		Integrated control system for touch screen CAD perforating machine programming and control
X. Y-axis drive		Servo closed-loop motor drive
Processing speed		40-60mm/minute
Maximum adjustment speed of spindle		120mm/min
Rotating head/C-axis speed		60-120rpm
Maximum processing current		45A
Workbench height		920mm
Fixture form		Frame type fixture
Maximum displacement velocity		1m/min
XY displacement degree		0.02mm
Working fluid		purified water
Pneumatic pump		Imported pumps from Taiwan
Input maximum power		3.5kw
Overall dimensions of the host		1500X1200X2200

Shenwei CNC Machine Tool (Jiangsu) Co., Ltd
Company website http://www.szswsk.com
Contact: Mr. Qian 15262655926
Phone: 0512-67311226 67311626 Fax: 0512-67311626

Scope of application of fully CNC high-speed perforating machine:

Using electrode tubes (brass tubes, brass tubes) as tool electrodes and utilizing the principle of electric discharge erosion, high-frequency pulse power is applied between the electrode (hollow copper tube) and the work to form a small pulse width, high peak current discharge machining, supplemented by a steam driven high-pressure pump for cooling and slag discharge. Greatly accelerate the etching speed of workpieces, especially suitable for stainless steel. Deep small holes with a diameter between 0.15mm and 3.0mm can be machined on various conductive materials such as quenched steel, copper, aluminum, and hard alloys, with a depth to diameter ratio of over 300:1. They can be directly machined on the inclined or curved surfaces of the workpiece. Mainly used for processing thousands of holes in molds and threading holes, fiber spinning heads, spinning holes in spinning plates, group holes in filter plates and sieve plates, heat dissipation holes in engine blades and cylinder bodies, hydraulic and pneumatic valve bodies, oil and gas path holes, etc. It can also be used to remove broken drill bits, taps, etc. in workpieces.
Basic functions of the control system:
Operation and input method: Touch based CAD drawing or USB import
b. Multi coordinate system: 1 absolute coordinate and 6 relative coordinates for easy positioning and processing of workpieces at any time.
c. Graphic coordinate transformation, scaling, rotation, and graphic tracking display functions.
d. Power outage memory function, automatic shutdown function at the end of processing, and automatic pause function during the process.
E. Automatic end face and center function
f. Processing trajectory planning, interpolation and other functions
g. Menu technology, automatic programming function.
h. Management of engineering files such as G-code.
j. Equipped with automatic electrode trimming function and gap servo tracking control
k. Equipped with Z-axis automatic reset and depth control function
i. It can achieve the conversion between CNC machining and manual machining modes.
m. Professional and efficient digital pulse power supply, real-time detection of discharge status, reasonable adjustment of high-frequency energy, effectively improving processing efficiency.


Equipment configuration power/actual operating power:

The equipment requires a three-phase four wire 380V, 60HZ AC power supply

The rate should not be less than 2.5KVA, and the external input voltage range is required to be 380V ± 10%.

The actual operating power is 3.5KVA.

Main functions and features of the equipment:

(a) X, Y, Z-axis fully CNC programming, touch screen control

(b) High precision, CNC machine tools can perform point-to-point CNC machining, automatic

Repair electrode function.

(c) Side positioning function.

(d) Suitable for processing stainless steel, quenched steel, hard alloys, copper, aluminum

Waiting for various conductive materials.

(e) Low loss, machining aperture of 0.15-3mm, maximum depth to diameter ratio can reach

Above 300:1.

(e) High efficiency, with a maximum processing speed of 40-60mm/min.

(f) Directly penetrate from inclined or curved surfaces; Directly use pneumatic pump.

(g) Equipped with digital display and touch screen.

(h) The workbench is made of stainless steel.

(J) The pressure gauge is visible

Serial number	name	quantity	remarks
1	SWSK-DD703 Host	1 unit
2	12-14 sheet metal operator	1 piece
3	DD703qsk User Manual	1 book	Factory documentation
4	Operation Manual for Digital Display Meter	1 book	Factory documentation
5	Packing list	1 book	Factory documentation
6	Certificate of Conformity	1 book	Factory documentation
7	M3 inland corner sheet metal operator	1 piece	enclosure
8	M4 inland corner sheet metal operator	1 piece	enclosure
9	M5 inland corner sheet metal operator	1 piece	enclosure
10	M6 inland corner sheet metal operator	1 piece	enclosure
11	150mm flat screwdriver	1 piece	enclosure
12	150mm cross screwdriver	1 piece	enclosure
13	Φ 0.5mm copper electrode wire	10 pieces	give
14	Φ 1.0mm copper electrode wire	10 pieces	give
15	Φ 0.5mm gemstone guide	1 piece	give
16	Φ 1.0mm gemstone guide	1 piece	give
17	Φ 0.5mm sealing ring	5 pieces	give
18	Φ 1.0mm sealing ring	5 pieces	give
19	Machine tool pad iron	4 pieces	enclosure
20	Grating ruler, digital display meter	1 set	enclosure
21	Calibration core rod	1 piece	enclosure
22	bucket	2 pieces	enclosure

Shenwei CNC Machine Tool (Jiangsu) Co., Ltd
Company website http://www.szswsk.com
Contact: Mr. Qian 15262655926
Phone: 0512-67311526 Fax: 0512-67311626