Due to the temperature factor of the dry quenching coke oven, its material level measurement can only be controlled and alarmed using a single point switch. The specific amount of furnace material inside the furnace is unknown. Based on years of experience in the production of level instruments and the structural characteristics of dry quenching coke ovens, our company has specially developed the ZN-CDQLS2300 continuous dry quenching coke ovenMaterial level gaugeMeasuring instruments. This level gauge has applied for a national patent to fill the gap in the inability to measure the dry quenching coke level both domestically and internationally.

measuring principle
Install the measuring probe on the wall of the silo, and the probe forms a capacitive field opposite the silo wall. The probe is positive and the compartment wall is negative. The up and down changes in the material level cause the capacitance between the two poles to increase or decrease. The pulse card in the probe can convert the level change into a pulse signal and send it to the control instrument. The control instrument is converted into engineering quantity display after calculation and processing, thus achieving continuous measurement of material level. Enable operators to accurately determine the precise height of dry quenching.

Specification
★ Scope of application: Powder, red coke

★ Probe temperature resistance: ≤ 1200℃

★ Power supply: 220VAC 50/60Hz or 24VDC (optional)

★ Output: 4-20mA (four sets of relay contacts 3A250V/50Hz)

★ Signal transmission: Sensor and control instrument signal transmission can reach up to 1000 meters

★ Delay time: 0-18 seconds adjustable

★ Sensor: 3m～10m

★ Electrostatic spark protection: unique electrostatic elimination function

★ Shell protection: Compliant with IP67 standard

Dust removal bin level gauge