VIP member
Product details
1 summary
The Qianshun brand series water tanks produced by our company are made of high-quality boards, which are made into single plates of different specifications (1m × lm, lm × 0.5m, 0.5m × 0.5m), and then assembled. The relevant parameters of this product are designed based on the "Code for Design of Building Water Supply and Drainage" (GBJ15-88), and the various hygiene indicators of this series of products have been tested to meet the "Sanitary Standards for Drinking Water" GB5749-85. This series of water tanks has the advantages of flexible on-site assembly, low deformation, strong seismic resistance, corrosion resistance, easy cleaning, and long service life.
II Scope of application
Mainly suitable for regulating building water supply, fire water tanks, storage water tanks, expansion and condensation water tanks for heating systems, temporary water tanks for building construction, road construction, geological exploration, and national defense projects. The water tank can store both cold and hot water, and is resistant to acid, alkali, seepage, leakage, deformation, and corrosion.
3、 Characteristics
1Beautiful appearance
2One time plate formation
3On site assembly, convenient for construction
4、 Selection instructions
1When placing an order, the size of the water tank, the location of the connecting pipe, and the diameter of the pipe should be provided.
2Using storage water temperature4
3The load of the water tank on the ground should be determined by the structural designer.
4When the water tank connection position provided by the user is exactly at the board joint, our company needs to adjust it while keeping the pipe diameter unchanged(Without further notice to users).
5、 Installation and acceptance
1During installation, leave no less than700Millimeter maintenance channel
2The top and bottom of the box shall not be less than500Haomi.
3During civil construction, the support piers should be prepared first, and the connection joints between the unit plates at the bottom of the water tank should be located on the support piers.
4After assembly, close the outlet and drain pipes, open the water pipe, and check the water level while adding water until it is filled with water. If there is no water leakage for 24 hours, it is considered qualified.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-