The carbon dioxide incubator, based on more than ten years of design and manufacturing experience, has been continuously researched and upgraded, and new technologies have been applied to products, representing the development trend of carbon dioxide incubators. Adopting imported infrared CO2 sensors, the control accuracy is accurate and stable, and is not affected by temperature and humidity.

Main features:

◆ Faster CO2Concentration recovery speed

During the experiment, it is necessary to frequently open the box door, and infrared sensors are a suitable choice.

Imported infrared (IR) sensors have fast monitoring speed for carbon dioxide gas and are not affected by external temperature and humidity fluctuations

Features such as closing the door 30 seconds after opening, it can recover to 37 ℃ in less than 10 minutes, and recover to 5% of the set CO2 concentration in less than 5 minutes. Even in situations where multiple people use it frequently and need to open or close the door, it can still maintain stable and uniform CO2 concentration inside the box. However, thermal conductivity sensors are easily affected by temperature and humidity, and have long response times and large detection errors. If used for a long time, they require frequent calibration and other defects.

◆ Microbial high-efficiency filter

The CO2 inlet is equipped with an efficient microbial filter, which has a filtration efficiency of up to 99.99% for particles with a diameter greater than or equal to 0.3 μ m, effectively filtering bacteria and dust particles in CO2 gas.

◆ Door temperature heating system

The CO2 incubator door can heat the inner glass door, effectively preventing condensation water from the glass door and preventing the possibility of microbial contamination caused by condensation water from the glass door.

◆ Automatic control of circulating fan speed

The speed of the circulating fan can be automatically controlled. When the temperature inside the box is at a constant temperature, the speed will decrease and the circulating wind speed will

Adjust the wind speed to a suitable level for cell growth to avoid sample evaporation caused by excessive airflow during the experiment.

◆ HEPA high-efficiency filter:

It can effectively filter out bacteria and dust particles from the outside air, eliminate and prevent cross contamination between the outside air and the interior of the incubator, and keep the incubator in a sterile state.

After the door is closed for 5 minutes, the air quality inside the box can be restored to level 100 cleanliness.

HEPA high-efficiency filters are easy to disassemble and assemble without the need for tools.

◆ Humanized design

Stackable placement (two layers) facilitates the full utilization of laboratory space, and the large LCD screen above the outer door can display

Temperature, CO2 concentration value, relative humidity value, menu style operation interface, simple and easy to understand, convenient for observation and use.

◆ Safety features

Independent temperature limit alarm system, capable of sound and light alarm to alert the operator, ensuring safe operation of the experiment without accidents.

It has alarms for low, high, and over temperature, as well as alarms for high or low CO2 concentration.

Equipped with safety facilities such as alarm for prolonged opening time and reminder of UV sterilization status.

◆Equipped with a microcomputer controller

The large screen LCD display adopts microcomputer PID control and can simultaneously display temperature, CO2 concentration, relative humidity, and operation, fault prompts. The menu style operation is simple and easy to understand for observation and use.

◆90 ℃ High Temperature Damp Heat Sterilization System

It can thoroughly sterilize the interior (including temperature sensors, carbon dioxide concentration sensors, fans, partitions, and brackets) with high temperature and humidity, completely eliminating microbial contamination caused by bacteria, molds, mycoplasma, and other microorganisms on cell culture, providing users with a safe experimental environment.

◆Data recording and fault diagnosis display(Optional)

All data can be downloaded to the computer through the RS485 port and saved. In case of any failure, the data can be retrieved from the computer and diagnosed in time.

BPN-80CH carbon dioxide incubator: laboratory popularization, economical type

BPN-80CRH carbon dioxide incubator: professional grade cell culture tool

Technical parameters:

：，

：

yuyanbio

： yuyanbio