VIP member
Calcium hydroxide production line
Advantages of calcium hydroxide complete equipment products: 1. Due to the excellent environmental standards of calcium hydroxide complete equipment,
Product details
Product Introduction
advantage：
Due to the excellent environmental standards of calcium hydroxide complete equipment, almost no smoke emissions, environmental protection and energy saving, and minimal impact on the surrounding environment, the requirements for equipment installation environment are low.
2. The traditional production method has low production efficiency, with a maximum daily production of less than 10T calculated based on 10 hours per day. We cannot guarantee a large supply demand. Can only supply to ultra small enterprises. Our company's process is based on the commonly used BL-6 equipment, with an hourly output of 6T. If needed, it can be produced continuously for 24 hours.
3. The complete set of calcium hydroxide equipment is completely controlled by PLC computer, which eliminates some drawbacks of the traditional old-fashioned process and manual control, and improves quality control capabilities. Moreover, changing workers will not have an impact on product quality.
4. The complete set of calcium hydroxide equipment consumes about 15% less energy than traditional processes, greatly reducing customers' operating costs and improving economic benefits.
Calcium oxide complete equipment
General Motors' fully automatic energy-saving calcium hydroxide production equipment has good performance. The equipment uses a self-developed PLC electrical control system, which has multiple functions such as data processing, parameter setting, direct interface display, and equipment alarm, greatly simplifying production management costs and improving the production efficiency of the enterprise. The company's equipment uses international and domestic first-class electrical components to ensure the safety and stability of equipment operation and control systems.
The production process of calcium hydroxide is as follows:
9 major systems
① Crushing system:Hammer crusher
② Conveyor system:Bucket elevator、Conveyor
③ Digestive system: Qualified calcium oxide enters the primary digester for preliminary digestion. After the primary digestion of calcium hydroxide is completed, it enters the secondary or tertiary digester to completely digest and decompose calcium oxide, producing qualified primary calcium hydroxide products with a digestion rate of 98% (3T connected equipment, 6T equipment secondary digestion, 10T equipment tertiary digestion)
④ Slag discharge system: first and second stage slag discharge. The first stage slag discharge first discharges impurities larger than 0.5cm in the semi-finished product, and then the second stage slag discharge discharges components smaller than 0.5cm, sand, and coal ash
⑤ Dust removal system: Collect the dust generated by the equipment itself, with a dust collection rate that meets the national standard (20 milligrams per cubic meter) and does not produce secondary pollution
⑥ Powder selection system: using dedicated closed-loop air collection for powder collection
⑦ Electrical Control System: The equipment's electrical control system adopts PLC centralized control and CRT screen display. PLC is mainly used for data processing, parameter setting, direct display of equipment operation status, full process control of product quality, and equipment fault alarm through computer graphics. All electronic control components are selected from top international and domestic brands to ensure the safety and stability of equipment operation and control systems.
⑧ Packaging system: including non metered packaging
⑨ Ingredient system: digital display, manually adjusted to complete the ratio of water and lime
Customer Case
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-