VIP member
Product details
BINDER FD23 drying oven
1、 Product Introduction:
1. Temperature range: ambient temperature plus 5 ℃ to 300 ℃
2 APT.line ™ Preheating chamber technology
3. Circulating air
4. Adjustable exhaust valve
5. Controller with time function
6. 2 chrome plated sockets
7. Independent adjustable temperature safety device level 2 (DIN 12880) with optical alarm
2、 Technical parameters:
PRODUCT MODEL |
FD023-230V1 | FD023UL-120V1 |
| Choose a model | standard | standard |
| Item code | 9010-0194 | 9010-0196 |
| measure | ||
| Internal volume [L] | 20 | 20 |
| Net weight of equipment (unloaded) [kg] | 27 | 27 |
| Maximum total load [kg] | 25 | 25 |
| Maximum load per partition [kg] | 12 | 12 |
| The dimensions of the casing do not include additional components and connectors | ||
| Net weight width [mm] | 435 | 435 |
| Net weight at height [mm] | 495 | 495 |
| Depth net weight [mm] | 520 | 520 |
| Wall distance from rear [mm] | 160 | 160 |
| Wall to side distance [mm] | 100 | 100 |
| Internal dimensions | ||
| Width [mm] | 222 | 222 |
| Height [mm] | 330 | 330 |
| Depth [mm] | 300 | 300 |
| The number of doors | ||
| Outer door | 1 | 1 |
| Data related to the environment | ||
| Energy consumption at 150 ℃ [Wh/h] | 300 | 300 |
| firmware | ||
| Number of partitions (hours/maximum) | 2/4 | 2/4 |
| Temperature performance data | ||
| The temperature range exceeds the indoor temperature by 5 ℃ to [℃] | 300 | 300 |
| Temperature deviation is 150 ℃ [± K] | 2.5 | 2.5 |
| Temperature fluctuation at 150 ℃ [± K] | 0.3 | 0.3 |
| Heating time to 150 ℃ [min] | 25 | 25 |
| The recovery time after opening the door in 30 seconds is 150 ℃ [min] | 6 | 6 |
| Ventilation data | ||
| Air exchange rate at 150 ℃ [x/h] | 64 | 64 |
| Electric data | ||
| Rated voltage [V] | 230 | 120 |
| Power frequency [Hz] | 50/60 | 60 |
| Rated power [kW] | 0.8 | 0.8 |
| Equipment safety device [A] | 10 | 12.5 |
| Phase (rated voltage) | 1～ | 1～ |
1·All technical data is only applicable to standard specifications of unloaded equipment under ambient temperature of 22 ± 3 ℃ and ± 10% power supply voltage fluctuation. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. The technical data assumes a fan speed of 100%. We reserve the right to make technical changes.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-