The AquaChlor residual chlorine measurement system is installed on a 12 inch by 12 inch panel. The panel can be installed to the wall using 1/4 inch bolts and washers.

The system's flow channel has an overflow weir to control pressure and regulate flow velocity. During this process, the sample continuously overflowed. The chlorine sensor system is inserted into a side port as an application for measuring pH value, with the pH sensor inserted from the top. When pH compensation is required, both the pH sensor and residual chlorine sensor must be connected to the AV38 display. This AV38 monitor is used to calculate the concentration of residual chlorine. In addition, the PH and residual chlorine DataStick systems can be directly connected to the network without the need for an AV38 display.

Product advantages:
1. Sensor calibration is convenient and can be done in the laboratory without the need for recalibration after connecting the instrument
2. All communication adapters support measurement, calibration, configuration, and diagnostic functions without the need for an analyzer or controller
3. Through AV38 local display, real-time output data report, relay control
4. Can communicate with Modbus, DeviceNet, USB, RS-232, and CANopen network connections
5. Simple maintenance: easy replacement of membrane and electrolyte