The entire machine frame is welded with high-strength rectangular tubes through multiple strength calculations and load-bearing strength analysis. The entire machine frame undergoes acid washing, phosphating, and manual aging treatment before being painted. All control system circuits of the entire machine are protected, making maintenance operations safer. The pneumatic system adopts imported pneumatic components, which have a long service life and are easy to maintain. It is also equipped with functions such as automatic water filtration, drainage, and lubrication of the cylinder.

This machine adopts high-quality electrical components with high reliability. High production efficiency and high degree of automation are the main equipment for processing and producing excellent aluminum and plastic doors and windows.

Characteristics:

Used for cutting aluminum profile strips at any angle of 30 ° to 90 °, with a cutting length of 150-1500mm, with clear instructions on the sliding worktable. The cutting height of the profile is 0-60mm, which can be adjusted with the lower hand wheel.

Technical parameters:

Cutting height: 0-60mm

Cutting width: 0-120mm

Cutting angle: any angle between 30 ° and 90 °

Saw blade speed: 2800r/min

Cutting speed: stepless speed regulation

Blade specifications: outer diameter of 300mm, inner diameter of 30mm

Motor: 1.5kw

Working voltage/frequency: 380V / 50HZ

Working pressure: 0.4~0.6MPa

Compressed air pressure: 0.3 MPa

Gas consumption: 100L/min

Work positioning length 300-1700mm

Dimensions (length x width x height): 1200mm×820mm×1010mm

Weight: 228 kg