Aluminum alloy threaded flame arrestermodel：SCZ25-6

Product Overview:Aluminum alloy threaded flame arresterIt mainly consists of two parts: the shell and the filter element. The shell should have sufficient strength to withstand the impact pressure generated by the explosion. The filter element is preventingfire

The main components for flame propagation are commonly used metal mesh filters and corrugated filtersThere are two types of cores. Diameter for metal mesh filter element0.23~0.315mmStainless steel or copper mesh, composed of multiple layers of overlapping.

At present, flame arresters in China usually use16~22Metal mesh, for4~12Layer. Aluminum alloy wire flame arrester is composed of many fine particles that can pass through gasSmall, uniform, or uneven channels or

The solid material composed of pores requires these channels or pores to be as small as possible, as long as they can pass through flames. In this way, the flame enters the flame arrester and splits into many small particles

The flame flow was extinguished. Flame energyThe mechanisms that can be extinguished are heat transfer and wall effect.

Standard for aluminum alloy threaded flame arresters：Execution standards:GB13347-92Fire resistance performance and test methods of flame arresters for petroleum gas pipelinesSH/T3413-99Petrochemical Petroleum Gas Pipeline

Selection, Inspection, and Acceptance of Road Flame ArrestersHG/T20570.19-95The setting of flame arresters.

Aluminum alloy threaded flame arresterMain materials and referencesnumber：

Flame arresterperformanceThe flame arrester has qualified explosion resistance performance,continuous13The secondary explosion resistance performance test can successfully block the fire every time,The flame arrester has qualified the fire resistance performance and undergone a fire resistance test1No response within hours

Fire phenomenon,Water pressure of flame arrester shell,The test is qualified. Reasonable structure, weightLightCorrosion resistance. Easy to maintain and convenient to install. The flame arrester core is mainly made of stainless steel material,corrosion preventive

And easy to clean.

Flame arresterThe main purpose of:

1Flame arresters can be used on pipelines transporting flammable gases.

2、approveUsed in torch systems.

3、Used in oil and gas recovery systems.

4、Used on the pipe network for heating furnace fuel gas.

6、Used in gas analysis systems.

7、Used in coal mine gas emission system.

8、Used in flammable and explosive solvent systems.

Flame arresterMaintenance and upkeep：

1)In order to better achieve the performance of the flame arrester for use, before installing the flame arrester, it is necessary to carefully read the instructions provided by the manufacturer and carefully check the label and the installed pipeline

Request consistency.

2)、Flame arresterThe flow direction mark on the top needs to be consistent with the flow direction of the medium.

3)、Flame arresterIt should be checked every three to four months. Check whether the fire-resistant layer has defects such as blockage, deformation, or corrosion.

4)When cleaning the flame arrester core components, high-pressure steam, non corrosive solvents, or compressed air should be used for blowing, and sharp hardware brushes should not be used.

5)When reinstalling the fire-resistant layer, the gasket should be updated and the sealing surface should be confirmed to be clean and undamaged, without any air leakage.

6)、storage tankFlame arresterIf there is any damage, immediately repair or replace it.

Shanghai Nanshi is a professionalFlame arresterManufacturerThe products produced by the company include breathing valves, flame arresters, fire-resistant breathable caps, fire-resistant vacuum pressure caps, and aluminum alloy spheres

Valve, aluminum alloy single flange ball valve, oil discharge port, double door bottom valve, oil measuring hole and other supporting accessories.

Ordering Notice: (National Standard)

1A:Product name, model, nominal diameterB:Medium, temperature, and pressure rangeC:Do you have any attachments, delivery dates, special requirements, etc. so that we can make the correct selection for you.

2、 If our company's flame arrester has already been selected by the design unitModel, please refer to the flame arresterOrder the parameters directly from our sales center.

3、 When the situation you are using is very important or the environment is complex,Please provide design drawings and detailed parameters, our engineers and experts will focus on reviewing and analyzing for you.

4、 The above prices are all fictitious. Interested parties please contact us. We can provide you with professional solutions, including design, customization, complete sets, operation, and service. We have always been committed to

As a leader in the field of flame arresters, we will provide you with the latest updatesFlame arresterKnowledge, services, and technical consultants. If you have any questions, you can call us,We will definitely do our best

We are committed to providing you with high-quality service. By closely monitoring customer needs and application experience, grasping market orientation: through high-intensity R&D investmentEnter and enhance the team through scientific management and cultural shaping

Weaving ability; By attaching great importance to and continuously improving, we aim to make quality and service our brand symbols.

Welcome to visit our website【http://www.shhxfcj.com】,If you have any questions.You can call us,WeWe will do our best to provide you with high-quality service.

Telephone:.