Working Principle:
The all aluminum structure wood dryer can dry various tree species, specifications, and uses of wood. It has the advantages of high efficiency, energy saving, safety and reliability, short drying cycle, good drying quality, and low drying cost. It is widely used in large, medium, and small wood processing enterprises, especially for manufacturers engaged in wood product export business. The MCM series all aluminum structure wood dryer, during normal operation, the fuel is fully burned in the combustion chamber, generating heat energy, which is fully absorbed by the drying medium in the heat energy drying system, producing a temperature of about 180 degrees Celsius. Under the action of the circulating fan, the high-temperature airflow is transported to the drying chamber through the control system and conveying system to dry the wood. At the same time, the steam generation device on the equipment can produce a large amount of atmospheric steam. According to the requirements of the drying process, hot air (steam) can be timely sent into the drying chamber to spray steam and adjust the humidity of the wood. The humidity control system is an independent steam system equipped with safety devices. Saturated wet steam can quickly make the surface temperature and internal humidity of wood consistent, thereby achieving the goal of drying both the interior and exterior of wood simultaneously. For solid, thick and hard wood, intermittent heating drying technology can be used to solve defects such as internal cracking, end cracking, and deformation that occur during the drying process, greatly improving the yield of high-quality wood products. The all aluminum structure wood dryer is equipped with a heat recovery system, which significantly reduces drying costs and shortens drying cycles. When the moisture content of wood drops below 15%, after 6-8 hours of high-temperature dry steaming, all parasitic insects and their eggs inside the wood can be eliminated, solving the adverse effects caused by insects and improving the economic efficiency of the enterprise.

Main features of the product:
1. It is made using a rotary heating device, consisting of a combustion chamber, a thermal energy conversion chamber, a steam generation device, a combustion supporting device, a fan, a water mist dust collector, a chimney, and other parts. Efficient and energy-saving, with high thermal energy conversion rate.
2. The fuel required for combustion includes shavings, sawdust, wood scraps, coal, etc.
3. Adopting a unique steam generating device to ensure sufficient steam supply to the drying kiln. In the early stage of drying, due to the large amount of steam entering the room, the indoor humidity is increased to prevent wood deformation and cracking.
4. Dried wood has a short drying cycle, low cost, uniform drying, and good effect, which solves the defects such as internal cracking, fracture, surface cracking, deformation, and discoloration that occur during the wood drying process.
5. It can be designed as one furnace with two drying rooms to facilitate rotating operations according to requirements.
6. Technological transformation can be carried out in combination with existing soil kilns to save equipment investment.
7. The overall equipment is easy to operate, safe and reliable.
8. This equipment is suitable for drying various types of wood and is an ideal replacement for furniture factories, wood product factories, traditional drying kilns, and old drying equipment.
9. This device uses electricity as the heat source, and can also be made into a hot blast stove that burns coal or wood as the heat source. It can also be made into a dual-use coal and electricity according to customer needs. This device has low energy consumption, no pollution, program control, simple appearance, and can be easily mastered by ordinary users who do not understand computers.

Main technical parameters: (for reference only)

Reasonable planning and design can also be carried out according to the actual situation of the user, and design drawings can be provided to customize for the user.

Attention should be paid to the use of all aluminum structure wood dryer:
1. The wood enters the drying room and during the stacking process, using a reasonable spacing density can accelerate the drying speed of the wood. Reasonable drying technology and moisture removal time can improve the drying effect of the wood.
2. Try to minimize the simultaneous drying of wood with different thicknesses, densities, and moisture levels.
3. Regularly open the cold air inlet, and pay attention to the intake air volume of the cold air outlet when opening both the cold air outlet and the moisture outlet at the same time to avoid excessive temperature difference in the drying room.
4. Drying wood is a matter of haste, so the heating should not be too fast, otherwise wood cracking may occur. It is also important to pay attention to the stacking of wood, ensure even heating, and consider the direction of wind flow to allow hot air to circulate through the stacked wood.