Characteristic description:

1. Due to the working characteristics of valves, it is required that the actuator has full load starting capability at any position in the opening/closing and middle of the valve, which requires the motor of the actuator to have a large starting torque At the same time, due to the need for flow (opening) regulation, the motor must also have a small moment of inertia The ALX series electric actuator mechanism motor has been specially designed to meet these requirements.
2. Gear transmission made of heat-treated alloy steel material through precision machining has high strength, good wear resistance, and can withstand long-term fatigue load impact.
3. Each product comes with a handle at the factory. When manual operation is required, the handle can be directly inserted into the manual operation port to drive the valve. When not in use, the handle can be removed and stored separately.
5. Each cover is fixed to the box with stainless steel screws. When removing the cover, the screw connection on the cover should not come off to prevent loss.
6. The mechanical stroke limit bolt and stopper made of stainless steel can mechanically limit the mechanical action stroke of the actuator. For ease of adjustment, this bolt is placed externally, and the stainless steel nut ensures positioning after each adjustment. The termination of the trip is usually set to a 0-90 angle at the factory, but it can also be set to any angle.
7. The simple and clear design can clearly display the valve opening angle. ● represents the fully closed position of the valve, ○ represents the fully open position of the valve. The middle scale indicates the percentage of valve opening.