9L short matte film inner label plastic bucket-Global supplier

No. 4 Jinxiang Road, Zhoubian Private Development Zone, Sanshui District, Foshan City, Guangdong Province

Product Parameters

We apologize for the slight error in weight caused by manual measurement of dimensions!

capacity	9L round barrel (short body)
Product Number	02.0902
Upper caliber	258mm
Lower caliber	233mm
Bucket height	222mm
Net weight	508g
wall thickness	1.2mm
Oil nozzle cover	nothing
handle	Rubber handle

Product advantages

Witness Eslite ● Production Strength

All products of our company are made of brand new PP material and undergo a series of strict safety monitoring to ensure product quality before leaving the factory with peace of mind.

Adopting a brand new PP materialThe new PP material

Food grade material, non-toxic and odorless, green and reliable, strong load-bearing capacity, resistant to drop and pressure.

Handle testHand-held test

After being filled with water and sealed, the handle should be suspended for at least 48 hours without damage or deformation.

Pile height testStacking test

Take six samples and inject them with water of nominal capacity, cover them tightly, stack them six times high without support on all four sides, and place them at room temperature for 72 hours before inspection.

Leak proof testingThe leak test

Take three samples, inject water of nominal capacity into the bucket, cover tightly, lie down for 24 hours and inspect.

Drop testDrop test

Take three samples, inject them with water of nominal capacity and cover them tightly. For buckets with a capacity of no more than 11L, the drop height is 1.5m; for buckets with a capacity greater than 11L, the drop height is 1.2m. When dropping, make the bottom of the sample bucket approximately perpendicular to the ground, and the lower part of the bucket side parallel to the ground and hit the cement flat surface. Each sample is dropped three times in a row, checked and dropped, and a small amount of liquid is allowed to leak from the bucket mouth during the impact.

Aging resistance testAgeing resistance test

After sealing with water, pour or place vertically for more than 3 months without affecting its performance.