The 6-meter bending machine is a machine capable of bending thin plates. Its structure mainly includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket, and the worktable consists of a base and a pressure plate. The base is connected to the clamping plate through a hinge. The base consists of a seat shell, a coil, and a cover plate. The coil is placed in a recess of the seat shell, and the top of the recess is covered with a cover plate.

Working principle of 6-meter bending machine:

The hydraulic bending machine includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket, and the worktable consists of a base and a pressure plate. The base is connected to the clamping plate through a hinge. The base consists of a seat shell, a coil, and a cover plate. The coil is placed in a recess of the seat shell, and the top of the recess is covered with a cover plate.

When in use, the coil is energized by a wire, which generates an attractive force on the pressure plate, thereby achieving the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressure plate can be made into various workpiece requirements and can also process workpieces with side walls. The bending machine can meet the needs of various workpieces by replacing the bending machine mold.

Structural characteristics of 6-meter bending machine:

1. Adopting a fully welded steel structure with sufficient strength and rigidity;

2. Hydraulic transmission, the oil cylinders at both ends of the machine tool are placed on the slider, directly driving the sliding work;

3. The slider synchronization mechanism adopts torsion axis forced synchronization;

4. Adopting a mechanical block structure, stable and reliable;

5. Quick adjustment of slider travel, manual fine-tuning, counter display;

6. A wedge type deflection compensation mechanism is used to ensure high bending accuracy.

Operating procedures for 6-meter bending machine:

1. Strictly follow the operating procedures for machine tool workers and wear labor protection equipment according to regulations;

2. Before starting, it is necessary to carefully check whether the motor, switch, circuit, and grounding are normal and secure, and check that all operating parts and buttons of the equipment are stuck in the correct position;

3. Check the overlap and firmness of the upper and lower molds; Check whether each positioning device meets the requirements for processing;

4. When the skateboard and all positioning axes are not at the origin, run the return to origin program;

5. After the equipment is started, it should be idle for 1-2 minutes, and the skateboard should be fully moved 2-3 times. If any abnormal sound or malfunction is found, the vehicle should be stopped immediately, and the fault should be eliminated before it can work normally;

6. During work, one person should be in charge of unified command to ensure close cooperation between the operator and the feeding and pressing personnel, and to ensure that all cooperating personnel are in position before issuing the bending signal;

7. When bending the sheet metal, it must be compacted to prevent the sheet metal from lifting and injuring people during bending;

8. When adjusting the sheet metal pressing mold, the power must be cut off and the operation must be stopped before proceeding;

9. When changing the opening of the variable lower mold, no material is allowed to come into contact with the lower mold;

10. When the machine tool is working, no one is allowed to stand at the rear of the machine tool