Name: α-S300iA
Brand: Dongguan Shanben Injection Molding Machinery Co., Ltd
Availability: InStock

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13922934377
Address

No. 175 Zhen'an East Road, Xiaobian Road Section, Chang'an Town, Dongguan City

Contact Now

α-S300iA

Contact Supplier

More Products

Product details

project		unit	α-S300iA
clamping unit	clamping force	kN	3000(300tonf)
	Mold thickness (maximum)/Minimum) Dual template	mm	500/200
	Single template	mm	575/275
	Opening and closing mold stroke	mm	440
	Distance between pull rods (width)*High)	mm	810*710
	Template size (width)*High)	mm	800*750
	Top out points/ejection force/ejection stroke	drop/kN/mm	5/35(3.5tonf)/150
Shooting part	Screw diameter	mm	40	44	48	52	56	64	68	——	——	——	——	——
	Maximum ejection volume	cm³	188	268	318	442	640	836	944	——	——	——	——	——
	Injection specifications	——							200mm/sspecifications
	Maximum injection pressure	MPa	——	——	——	——	——	——	280	280	240	225	175	155
	Maximum holding pressure	MPa	——	——	——	——	——	——	280	280	220	190	130	130
	Maximum ejection velocity	mm/s	——						240/270
	Maximum speed of screw	min-1	——						300
	Injection specifications	——	330mm/sSpecification (small capacity injection)						330mm/sspecifications
	Maximum injection pressure (high filling mode)	MPa	340	340	320	270	220	——	380	345	280	——	——	——
	Maximum injection pressure	MPa	260	260	240	220	190	160	280	280	260	220	190	160
	Maximum holding pressure	MPa	260	260	220	200	170	140	280	280	260	220	190	160
	Maximum ejection velocity	mm/s	330						330
	Maximum speed of screw	min-1	450						400
	Injection pattern	——	500mm/sSpecification (small capacity injection)
	Maximum injection pressure (high filling mode)	MPa	340	320	280	——	——	——	——	——	——	——	——	——
	Maximum injection pressure	MPa	260	260	240	220	170	——	——	——	——	——	——	——
	Maximum holding pressure	MPa	260	260	220	200	170	——	——	——	——	——	——	——
	Maximum ejection velocity	mm/s	500						——
	Maximum speed of screw	min-1	450						——
	Injection specifications	——	1000mm/sSpecification (ultra-high speed injection)
	Maximum injection pressure	MPa	400	380	350	270	——	——	——	——	——	——	——	——
	Maximum holding pressure	MPa	380	350	300	230	——	——	——	——	——	——	——	——
	Maximum ejection velocity	mm/s	1000						——
	Maximum speed of screw	min-1	450						——

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content