Name: α-S100iA
Brand: Dongguan Shanben Injection Molding Machinery Co., Ltd
Availability: InStock

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13922934377
Address

No. 175 Zhen'an East Road, Xiaobian Road Section, Chang'an Town, Dongguan City

Contact Now

α-S100iA

Product details

project		unit	α-S100iA
clamping unit	clamping force	kN	1000(100tonf)
	Mold thickness (maximum)/Minimum) Dual template	mm	450/150
	Single template	mm	520/220
	Opening and closing mold stroke	mm	350
	Distance between pull rods (width)*High)	mm	460/410
	Template size (width)*High)	mm	660/610
	Top out points/ejection force/ejection stroke	drop/kN/mm	5/25(2.5tonf)/100
Shooting part	Screw diameter	mm	22	26	28	32	36	40
	Maximum ejection volume	cm³	29	50	58	103	147	181
	Injection specifications	——	200mm/sspecifications
	Maximum injection pressure	MPa	260	260	240	220	190	160
	Maximum holding pressure	MPa	260	260	220	200	170	140
	Maximum ejection velocity	mm/s	200
	Maximum speed of screw	min-1	300
	Injection specifications	——	300mm/sspecifications
	Maximum injection pressure (high filling mode)	MPa	340	340	320	270	220	——
	Maximum injection pressure	MPa	260	260	240	220	190	160
	Maximum holding pressure	MPa	260	260	220	200	170	140
	Maximum ejection velocity	mm/s	330
	Maximum speed of screw	min-1	450
	Injection pattern	——	500mm/sspecifications
	Maximum injection pressure (high filling mode)	MPa	340	320	280	——	——	——
	Maximum injection pressure	MPa	260	260	240	220	170	——
	Maximum holding pressure	MPa	260	260	220	200	170	——
	Maximum ejection velocity	mm/s	500
	Maximum speed of screw	min-1	450
	Injection specifications	——	1000mm/sSpecification (ultra-high speed injection)
	Maximum injection pressure	MPa	400	380	350	270	——	——
	Maximum holding pressure	MPa	380	350	300	230	——	——
	Maximum ejection velocity	mm/s	1000
	Maximum speed of screw	min-1	450

Online inquiry