Product Introduction:

Vacuum forming molds refer to the molds used in vacuum forming production. The lowest cost is gypsum molds, followed by electroplated copper molds and resin moldsmodel,The most expensive one is the aluminum mold. The mold is drilled with small holes for vacuum adsorption of heated hard film to form vacuum formed products.

Gypsum moldSuitable for sampling and small-scale production;copper mouldBelonging to the category of metal molds, they are more durable and produce products with good appearance and transparency; The price of mold making is relatively low;resin moldThe price is higher than that of copper molds and gypsum molds, but the degree of use is comparable to that of copper molds, which is more durable and can solve some technical problems that copper molds and gypsum molds cannot handle, such as water marks on the product wall;Aluminum moldThe precision is high and the product contours and angles produced are relatively beautiful, and the durability is very high. The price is also the highest among the four types of molds.

copper mould:

According to the product design requirements, after making the gypsum mold, a vacuum cover is produced using the gypsum mold. The vacuum cover is placed in the electrolytic cylinder, and when the surface reaches 5-8MM thickness, the mold is injected with gypsum, vacuum holes are injected, and the mold surface is polished smooth before use; It takes about 3-5 days; Belonging to the metal mold category, it is relatively durable, and products produced using this type of mold have better appearance and transparency; Mold making has a lower price and a wider range of uses, making it the preferred choice for molds in most cases; Mainly suitable for products with high requirements such as electronics, toys, stationery, cosmetics, automotive accessories, etc.

Click on the link to learn more:https://detail.1688.com/offer/.html?spm=a2615.7691456.0.0.917aca8ntdjnz

Company Introduction:

Shenzhen Huaxiang Automation Machinery Equipment Co., Ltd. was established in Shenzhen, the earliest developed area of China's vacuum forming industry. It is an integrated enterprise that integrates research and development with production. The company covers an area of 2000 square meters and is a Taiwanese industrial technology company that can provide solutions for a series of packaging machinery and entire production lines, including mold customization, material supply, and finished product outsourcing. Customers are spread throughout the country and exported to India, Vietnam, Myanmar, Thailand, Taiwan, and other regions. ！

contact information:

Address: Building D, No.12 Low Mountain North Road, Xinsheng Village, Longgang District, Shenzhen
Website: www.szhx-tw.com
Email: hx@szhx-tw.com
QQ： 800026708
Telephone:
Mobile phone: (Rao Sheng)
Mobile phone: (Ms. Rong)

Actual shot of mold: