Yin drive shaft
Our company produces vibration components: anode vibration hammer, cathode vibration hammer, hammer head, vibration drill, clamp, dust cover, dust cover, upper and lower fork, anode gear plate, cathode gear plate, coupling joint, cathode drive shaft, vertical shaft support plate, bearing seat, dry grinding dust bearing, vertical shaft bearing, center dust bearing, dust bearing, three wheel vertical bearing, four-wheel vertical bearing, four-wheel dust bearing, impact head, dust bearing limit, etc.
1. This dust collector adopts the technique of segmented air stop pulse blowing for dust cleaning, which overcomes the shortcomings of conventional pulse dust collectors and segmented back blowing dust collectors. It has strong dust cleaning ability, high dust removal efficiency, low emission concentration, low air leakage rate, low energy consumption, low steel consumption, small footprint, stable and reliable operation, and good economic benefits. Suitable for the purification of dusty gases and material recovery in metallurgy, building materials, cement, machinery, chemical, power, and light industry industries.
2. Due to the use of split chamber air stop pulse spraying for thorough cleaning, the cleaning cycle is extended and the energy consumption for cleaning is reduced, resulting in a significant decrease in compressed air consumption. At the same time, the fatigue level of the filter bag and pulse valve is correspondingly reduced, thereby doubling the service life of the filter bag and valve plate.
3. The maintenance and bag replacement can be carried out in separate rooms without stopping the system fan and under normal operating conditions of the system. The filter bag mouth adopts an elastic expansion ring, which has good sealing performance and is firm and reliable. The filter bag keel adopts a polygonal shape, which reduces the friction between the bag and the keel, extends the life of the bag, and is easy to unload.
4. Adopting the upper bag extraction method, after extracting the skeleton during bag replacement, the dirty bags are put into the lower ash hopper of the box and removed from the manhole, improving the operating conditions for bag replacement. Principle of Cyclone Dust Collector
5. The box adopts an airtight design with good sealing performance. The inspection door uses excellent sealing materials, and during the manufacturing process, kerosene is used for leak detection, resulting in a very low air leakage rate.
6. Compact layout of inlet and outlet air ducts with low airflow resistance