Xinxiang Hengyu Machinery Equipment Co., Ltd
Home>Products>Y7AE automatic oil-water separator for catering
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    15237385268
  • Address
    No. 8 Hengyu Road, Middle Section of Qinglong Road, Economic Development Zone, Xinxiang City, China
Contact Now
Y7AE automatic oil-water separator for catering
Y7AE automatic oil-water separator for catering
Product details

Product Introduction

Ten level oil-water separation technology


Primary filtration:The catering wastewater enters the pre-treatment module's waste interception device, and the diameter is reduced>5mmFilter out solid particles.

Secondary slag removal:The solid-liquid separation lifting system filters out the slag from the slag interceptor, shreds and squeezes it dry, and then lifts it to the slag bucket.

Third level precipitation:After being filtered by the slag interceptor, small solid particles, sewage, and oil settle in the sedimentation bin. The solid particles gradually settle to the bottom of the conical bin, and the sewage and oil enter the deepening treatment module.

Four level filtrationThe wastewater, grease, and slag processed by the pretreatment module are further filtered by a fine slag interceptor to remove some of the fine slag.

Five level separation:After entering the deepening processing module, the oil-water mixture undergoes thorough separation of slag, water, and oil under the action of the eddy current centrifugal separation settling system.

Level 6 oil guide:After being processed by the eddy current centrifugal separation settling system, the oil level detection system detects the oil layer, opens the automatic valve, and the upper layer of grease is gradually discharged from the oil collection tank through the spinning type automatic oil guiding system, and then discharged into the oil drum through the automatic valve.

Grade 7 slag guide:After being processed by the eddy current centrifugal separation settling system, fine particles of slag gradually settle to the bottom of the conical large settling bin. A slag guide system is installed in the slag collection well, which guides the separated slag out of the bin and finally discharged into the slag bucket.

Eight level floating slag treatment systemIn order to further improve water quality and avoid the situation of substandard water quality caused by human factors, a scum treatment system is set up to effectively collect and treat a small amount of residual scum.

Nine level flushing device:In order to avoid blockage of the slag interception device in the preprocessing module, a flushing device is installed to flush the slag interception device with treated purified water to avoid blockage.

Level 10 sewage improvement:The treated sewage that meets the standard is lifted and discharged into the municipal pipeline through an external lifting pump.



Working principle

Hengyu Oil and Water adopts advanced technologyEddy current centrifugal settling system+Fully automatic solid-liquid lifting and separation system+Oil guiding system+Slag guiding system+Intelligent detection and oil discharge system+Delay system+Technologies such as energy-saving systems. By utilizing the different specific gravities of slag, water, and oil, the slag, water, and oil are separated under the action of vortex centrifugal force. The vortex centrifugal settling system is further divided into an upper separation system and a lower separation system. The upper separation system separates water and oil, while the lower separation system separates slag and water. After treatment, the water quality meets the sewage discharge standards, and the oil removal rate is achieved100%.


Product Features


1. Completely enclosed enclosure, keeping the working environment clean and odorless

2. Intelligent control, eddy current sedimentation. Rotary floating oil guide

3. Equipped with advanced functions and intelligent detection technology, high degree of automation, saving labor costs

333

Product advantages


1. Flushing device: Use treated purified water to flush the slag interception device to prevent blockage

2. Scum collection system: It can collect and treat a small amount of residual scum caused by human error or excessive flow, making the treated purified water quality better

3. Automatic delay system: After the equipment is filled with water, the energy-saving system will automatically start, and the solid-liquid separation lifting system will start working with a delay30The eddy current centrifugal settling system will start up in seconds; After the scum collection system is started20In seconds, the lifting pump in the lifting module starts working

4. Siphon system: The equipment has a siphon function, and the separated sewage quality will be further improved through the siphon function


444

Technical Parameter

555

666

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!