Xinyu Electronic Technology Co., Ltd., Shizilou North Road, Shizilou Street, Yanggu County, Shandong Province

Intelligent lighting controller

model: XY-0208-LD

1 overview

XY-0208-LD(Light controller with LCD display)The intelligent street lamp controller adopts computer control technology and uses multiple sets of timers to control the lights on sitePLCImplement intelligent control of the lamp through communication interfaces. Intelligent controllers are widely used in lighting systems, building electrical control, and other fields such as industrial, commercial, and civil buildings. They are also suitable for fire electrical control and protection systems such as fire fans and fire pumps in modern buildings. They are widely used in public lighting environments such as municipal roads, highways, bridges, tunnels, underground garages, gardens, docks, sightseeing lights, sports plazas, amusement parks, advertising light boxes, and specialized lighting environments such as office buildings, homes, and schools. Applicable types of lighting fixtures: high-pressure sodium lamps, low-pressure sodium lamps, metal halide lamps, high-pressure mercury lamps, fluorescent lamps, and all other gas discharge lighting fixtures. Using a controller can effectively save resource consumption, reduce waste, and achieve the Internet of Things.

II Functional Features

1. Adopting advanced foreign microprocessor chips, it has high reliability, small error, and strong stability.

2. Equipped with power-off data protection, the clock operates continuously without the need for battery replacement, maintaining clock operation for over ten years.

3. 32Group working mode: The lighting time can be set by the user, with a range of00:00to23:59The turning off time can be set by the user, with a range of00:00to23:59.

4. Equipped with automatic/Manual conversion is convenient for the maintenance of electrical equipment or the needs of major celebrations.

5. Strong anti-interference ability, high-power relay output, can be connected220VContactor or or380VContactors have a long service life.

6. Can be equipped with light control and used in conjunction with time. (Please indicate with light control when ordering)

7. LCD display with 8 buttons;

8. Equipped with fully open and fully closed buttons;

9. Equipped with fully open and fully closed input terminals;

10. Equipped with fire linkage24VSignal, linkage feedback interface dry contact signal;

11. Power off memory function;

12. Remote centralized control and on-site control

13. Emergency manual control

14. Panel time setting and software time setting

15. Panel load status display and software settings

16. Can be equipped with external illumination detection and human infrared microwave induction

17. Wireless control can be added;

18. Standard rail installation

III Technical Parameter

1. Working power supply:direct-current12V DC ,electric current1A ;

2. operation temperature:- 10-65Celsius;

3. Overall Power Consumption:Standby less than3W ;Work less than6W ;

4. Timing error:30S/Year

5. Control interval:24Hour;

6. Number of time periods:32A timer;

7. Work schedule: daily/weekly/once a day

8. Timer: Maximum32A timer;

9. Communication port:RS485interface,default:Baud rate9600, N ,8,1,address1;

10. Communication protocol:modbus RTU

11. External dimensions ：90x100x65mm

4 Introduction to Panel and Wiring

Ø Button Description

1. 《 Up button, used for option selection

2. 》Move down button, used for option selection

3. ∧ Add button, used for numerical addition

4. ∨ Minus button, used for numerical subtraction

5. ENTConfirm button, used for option confirmation

6. ESCCancel button, used to return without saving

7. ON Fully open button, used to close all relays and turn on all lights

8. OFFFull off button, used to disconnect all relays and turn off all lights

Ø pilot lamp

1. Operation indicator light, normal 1Shining once every second or so;

2. Communication indicator light, used for communication indication;

3. Fire indicator light, used for firefighting purposes24VInput instructions;

Ø LCD screen Used to display menus and numerical values

Ø Output terminal description

) Working power supply:DC12V Connect separately12V+，GND, communication220VPower supply usageL,NTerminal.

2) communicationRS485：D+（A），D-（B）；

3) Fire feedback switch:NO COMRelay normally open

4) Photosensor:S- S+；

5) Fire start interface:24V+，24V-；

6) External all on/off interface: fully open, fully closed, common terminal;

7) First switch:NO1 CM1 Relay normally open and common terminal;

8) Second switch:NO2 CM2 Relay normally open and common terminal;

9) Third switch:NO3 CM3 Relay normally open and common terminal;

10) Fourth switch:NO4 CM4 Relay normally open and common terminal;

11) Fifth switch:NO5 CM5 Relay normally open and common terminal;

12) Sixth switch:NO6 CM6 Relay normally open and common terminal;

13) Seventh switch:NO7 CM7 Relay normally open and common terminal;

14) Eighth switch:NO8 CM8 Relay normally open and common terminal;

5 Introduction to LCD Menu

1) Start screen

2) main interface

main menu 0

Add:001 HH:MM:SS

1* * * * * * 6

7* * * * * * 12

YYYY-MM-DDweek01

explain

Add:Device communication address,current time:time:divide:second

The current status of the light *service, 0light off

Display on each line6The status of a light;Display in total12A lamp

current date,week

set timer 4

timer: 1-32

Status: Enabled/Deactivate

Repeat: Every day/every week/Single time/

Date:2018-07-05

Time:18:30

Action:

************

Confirm return

Manual switch5

Open:1-12

close:1-12

System Reset

return

explain

press “<”Button or “>”key Select project settings

timer:press∧∨ Modified Timer,press“>”Press button down

state:Enable the current timer

repeat:Timer working mode;

date:Single work mode displays date,Display the week on a weekly basis

Set timer time:18:30

action(Display the current relay number) press∧∨ Fully open or fully closed

Select a single relay to enable,press∧∨ key on or off,pressENTNext relay

pressENTButton modification return,pressESCPress the button to return without saving

explain

press “<”Button or “>”key Select project settings

open:press∧∨ Select relay switch channel pressENTKey execution

close:press∧ ∨ Select relay switch channel pressENTKey execution

System Reset: pressENTPress the button to reset to factory settings

return

pressENTButton modification return,pressESCPress the button to return without saving

VI Usage

(1) Device address modification

(II) Modify system time

pressENTkey

enter1menu

(3)

Time:20:15:00 <

Method for modifying time

time:> 20:15:00 <

time: 20:15>00 <

time: 20>15:00 <

press<perhaps>Choose the time for modification

2) pressENTChoose to modify in minutes or seconds

date: 2018>07:23 < <

date:> 18:07:23 <

press∧∨ Modify the size of the selected data

4) press<perhaps>Select the date for modification

5) press∧∨ Modify the size of the selected data

6) pressENTChoose to modify year, month, or day

date: 2018:07>23 < <

press<perhaps>Select the week for modification

8) Then select 'modify' and return

Week:06 <

pressENTkey Save and return

10) Or pressESEReturn without saving

(1) set timer

1) Press on the main interfaceENTEnter the settings menu

2) press<perhaps>Press the button to select timer settings,Enter the timer settings menu

3) Select Timer0-31,maximum32timers;

4) state:Select Enable,Enable,timer,

Time for relay activation

Deactivate:The relay does not operate when the time is up.

5) Repeat: Every day/every week/Single time

Select working mode

every day:Daily time until relay action.

every week:Below are options for weekly selection1-7Working hours;

Single time:setting year,the moon,sun,Hour, minute, second,Time to Relay

action.Only work once.

6) time:Time of relay action;

7) action:Select the relay that will activate when the timer expires

select

8) after that press ∧∨ Modify* On or off0

9) pressENTSelect the next relay ,common9Relays

10) final selection Confirm return

11) Timer time up,Relay automatically turns on or off the light.

(II) Set examples

1) give an example every day18: thirtyTurn on all the lights,every day6:00Turn off all lights

2) analysis:use2timers,Like a timer0 18: thirtyTurn on all the lights ,timer1 6: 00Turn off all lights

Ø timer0 18:30fully open set up

3) pressENTenterSet menu1

4) press<perhaps>Press the button to select and set the timer,Press the confirm buttonENT

5) Enter the timer settings menuset timer4-1

6) press<perhaps>key Select Timer

7) Select Timer: 0press ∧∨ Modify

8) press<perhaps>key Select Status

9) Status: Enabled press ∧∨ is modified to enable

10) press<perhaps>key selective repeat

11) Repeat: Every day press ∧∨ is modified toevery day

12) press<perhaps>key Timing

13)

Time:18:30 :00 <

1　************　12 <

set timer4-2

14) press When modifying ∧∨:divide:second

15) pressENTKey selection time,divide,second

16) Select the third line,Lamp switch operation

17) press ∧∨ is modified to open*

18) pressENTPress the button to select the next relay

19) 9Relays Select all as*********

20) Select confirm and return,pressENTkey

21) 18:30fully open timer0 Settings completed

Ø timer1 6:00Fully closed set up

1) pressENTenterSet menu1

2) press<perhaps>Press the button to select and set the timer,Press the confirm buttonENT

3) Enter the timer settings menuset timer4-1

4) press<perhaps>key Select Timer

5) Select Timer: 0press ∧∨ Modify

6) press<perhaps>key Select Status

7) Status: Enabled press ∧∨ is modified to enable

8) press<perhaps>key selective repeat

9) Repeat: Every day press ∧∨ is modified toevery day

10) press<perhaps>key Timing

11)

Time:>06:30 :00 <

set timer4-2

12) press When modifying ∧∨:divide:second

13)

1　0000000000　12 <

pressENTKey selection time,divide,second

14) Select the third line,Lamp switch operation

15) press ∧∨ is modified to open*

16) pressENTPress the button to select the next relay

17) 9Relays Select all as0000000000

18) Select confirm and return,pressENTkey

19) 06:00Fully closed timer1 Settings completed

1 communication protocol

1. Communication protocol supportmodbus RTU；

Default Address1, baud rate9600，N(No verification),8（8Digit data),1（1Stop position)

2. RELAY CONTROL Use function code5Or function code0FRead the relay status usage function code1

Register address	thoroughfare name	Data investigation
0	auxiliary word for ordinal numbers1Road relay	close:01 05 00 00 FF 00 8C 3A to break off:01 05 00 00 00 00 CD CA