VIP member
Xinming Integrated Piezoelectric Ceramic Controller
The HVA series piezoelectric ceramic driver of Xinming Integrated Piezoelectric Ceramic Controller is an integrated single channel open-loop piezoelec
Product details
Xinming Integrated Piezoelectric Ceramic ControllerThe HVA series piezoelectric ceramic driver is an integrated single channel open-loop piezoelectric ceramic driver that can drive piezoelectric ceramic sheets, stacked piezoelectric ceramics, open-loop encapsulated piezoelectric ceramics, and open-loop nano positioning worktable piezoelectric actuation products. It can provide high stability and high resolution voltage for piezoelectric ceramics, and has excellent frequency response. Having multiple control modes, it can meet the needs of low-voltage open-loop applications.
Xinming Integrated Piezoelectric Ceramic Controller HVA series piezoelectric ceramic driver
technical parameter
model |
HVA-120.B1 |
function |
Piezoelectric ceramic drive power supply |
Number of channels |
1 |
control type |
open loop |
control mode |
Analog input, keyboard input, USB communication, spontaneous waveform |
communication interface |
USB2.0 |
Analog input range (V) |
Monopolar 0~+10, Bipolar -10~+10 |
Analog input impedance (k Ω) |
100 |
Nominal voltage output (V) |
Nominal 0-120 (optional 0-150, 200, 300, ± 150) |
Polarity |
Monopolar/Bipolar |
Output ripple (mV) |
10 |
Output voltage resolution |
16Bit 5mV (120V, 150V, ± 150V), 10 mV (200V, 300V) |
Voltage stability (% F.S./8hours) |
<0.1 |
Average output power (W) |
20 |
Average output current (mA) |
160 |
Peak output power (W) |
60 |
Peak output current (mA) |
500 |
Output protection |
Short circuit protection, power limit protection |
Empty load full amplitude bandwidth (Hz) |
5k |
Dynamic power calculation |
Peak to peak voltage (V) × frequency (Hz) × load (F) ≤ average output current (A) (average output power/nominal voltage output) |
External features |
Thin film buttons, LCD display |
software configuration |
Equipped with standard computer control software |
Introduction to spontaneous waveform function |
Can spontaneously output sine wave, square wave, triangular wave, sawtooth wave, with frequencies within 1kHz without attenuation or distortion |
LCD keyboard communication interface |
Standard configuration |
Input/output connector |
LEMO ERA.00.250.CTL |
Working temperature range (℃) |
0 to 50 |
ambient humidity |
<85% |
working voltage |
220VAC 50Hz±10％ |
Chassis size: length x width x height (mm)3） |
320 × 275 × 135 |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-