Beijing Jingxiang Environmental Technology Co., Ltd
Home>Products>WTF5-AB type continuous monitoring system for flue gas emissions (condensation method)
WTF5-AB type continuous monitoring system for flue gas emissions (condensation method)
The EM-5-CD Continuous Emission Monitoring System (CEMS) for flue gas emissions consists of four basic components: smoke monitoring subsystem, gaseous
Product details

The EM-5-CD Continuous Emission Monitoring System (CEMS) consists of four basic components: smoke monitoring subsystem, gaseous pollutant monitoring subsystem, smoke parameter monitoring subsystem, and system control and data acquisition and processing subsystem. Can monitor SO2 in gases NOx、O2、 Parameters such as dust, temperature, pressure, flow rate, etc. can also be extended to HCl for specific occasions HF、CO、CO2、 Monitoring of humidity and other parameters. The tested gas undergoes sampling probe dust removal, heat tracing tube sampling, multi-stage filtration, and two-stage condensation for rapid water removal and cooling, and enters the micro heat tracing gas analysis module (DOAS and TDLAS technology) for analysis and measurement. The use of dry measurement effectively solves technical problems such as large fluctuations in data measurement caused by humidity changes in waste incineration.


Product Features

Secondary condensation for rapid water removal and cooling, reducing contact time between gas and water, and decreasing SO2 loss;

The analyzer adopts micro tracing technology to reduce the maintenance cycle of the measurement pool;

Fast loop sampling pump sampling, fast response time;

Multi stage filtration for water and dust removal, high reliability;

It can achieve full calibration.


Application scenarios

Monitoring and process control of exhaust emissions from coal-fired power plants, waste to energy plants, cement plants, glass plants, lime plants, ceramic plants, sintering plants, coke ovens, desulfurization processes, denitrification processes, etc.


Specification parameters

SO2:0~300~3000ppm,O2 :0~25%

NOx:0~300~3000ppm, Humidity: 0-40%

Dust: 0~200mg/m3, 0~10g/m3

Flow rate: 0-40m/s (customizable)

Temperature: 0-300 ℃ (customizable)

Pressure:- 10kPa~+10kPa (customizable)

Size: 880mm × 600mm × 1800mm

Heat tracing temperature: 120 ℃~180 ℃

Protection level: Cabinet IP42, other IP65

Power supply: 220VAC, 4000W

Working temperature:- 10℃~+40℃

Working humidity: 0-95% RH (non condensing)

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!