Vertical pipeline pump

Vertical pipeline pump

Vertical pipeline pumpIt is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in pipelines like a valve, with installation feet to increase pump stability. It has a compact and beautiful appearance, small footprint, and low construction investment.

Vertical pipeline pumpThe impeller is directly installed on the extended shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth pump operation and low vibration noise.Vertical pipeline pumpThe shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals, which can effectively increase the service life of mechanical seals. Easy installation and maintenance, no need to disassemble the piping system, simply remove the pump coupling nut to extract all rotor components. Pumps can be operated in series or parallel according to the requirements of flow rate and head. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.

Vertical pipeline pumpMain purpose:

ISG type pipeline centrifugal pump is used for transporting clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden irrigation, fire pressure boosting, and equipment matching. The operating temperature T is ≤ 80 ° C.

The IRG (GRG) type hot water (high temperature) circulation pump is widely used in energy, metallurgy, chemical, textile, papermaking, as well as hotels, restaurants, and other boiler high-temperature hot water pressurized circulation transportation and urban heating system circulation pumps. The IRG operating temperature T: ≤ 120 ° C, GRG operating temperature T: ≤ 240 ° C.

IHG type pipeline chemical pump is used for conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for departments such as petroleum, chemical, metallurgical, power, papermaking, food, pharmaceuticals, and synthetic fibers. The operating temperature is T:- 20 ° C-120 ° C.

YG type pipeline oil pump, used for transporting petroleum products such as gasoline, diesel, kerosene, etc., operating temperature T:- 20 ° C-120 ° C.