Three layer electrical and electronic constant temperature and humidity chamber, mobile phone high and low temperature test chamberPaired with a high-precision programmable controller in a two-layer constant temperature and humidity machine that integrates two or three machines

characteristic:

1. Control of each layer Cooling Heating Humidification The dehumidification and circulation systems are independent and can be individually tested under different conditions

2. Attached water recycling and circulation device to save water

3. Save space occupation

Model: LK-80-3C Capacity (L): 80 (can be selected according to needs)

Internal dimensions (HWD) mm: 500 × 400 × 400

Performance: Temperature/Humidity Range

Temperature: R: -20~+150 degrees

Humidity: 30%~95% RH

Temperature fluctuation:&plsmn; 0.5 degrees

Humidity fluctuation:&plsmn; 1.0%RH

Heating time -20~+150 degrees, less than 35 minutes

Cooling time:+20~-20 degrees, less than 45 minutes

Temperature regulation method: BTHC method (balanced temperature and humidity regulation method)

Working environment temperature:+5~+30 degrees

Heater: Nickel chromium alloy electric wire heater

Humidifier (temperature and humidity model): Shallow slot heating humidifier

Blower: Centrifugal fan temperature (humidity)

Sensor: PT100 dry wet bulb sensor structure and components

Three layer electrical and electronic constant temperature and humidity chamber, mobile phone high and low temperature test chamberMaterial of inner and outer boxes: Inner box: mirror stainless steel plate; Outer box: stainless steel or steel plate spray coating

Insulation material: hard polyurethane foam+glass wool

Controller: TEMI human-machine interface touch screen controller from South Korea

Freezing system: French Taikang fully enclosed compressor/environmentally friendly refrigerant

Protection device: Compressor overheating, overcurrent, overpressure, heating humidification air burning, box temperature rise, water shortage alarm system

Power supply: 1 ф 3W220VAC&plsmn; 10%

Standard configuration: observation window (indoor lighting), one ф 50mm cable hole (located on the left side), two sets of sample racks (adjustable height), mobile work wheel, humidification water tank

Optional parts: Communication interface, recorder, built-in glass door, and operating hole