Detailed information on DK-8D three hole electric constant temperature water bath:

DK-8DThree hole electric constant temperature water bathApplication scope:
Used for precision temperature control, auxiliary heating, gene amplification, etc. in medical and health institutions, medical colleges, industrial and mining enterprises, and scientific research units.

DK-8DThree hole electric constant temperature water bathProduct features:
1.Adopting stainless steel inner liner, with a novel and beautiful design;
2. Three hole independent temperature control.
3. Digital display and microcomputer control.

DK-8D Technical parameters:
model: DK-8D
Temperature control range: RT+5-99 ℃
Temperature accuracy: ≤ ±0.5℃
Temperature fluctuation: ≤ ±0.3℃
Temperature resolution: ≤ ±0.1℃

Internal dimensions (mm): (150X150X115mm) × 3
Power: 300W × 3
Power supply voltage: AC220V 50Hz

DK-8DUsage and precautions;

1. Safe use of electricity: This product uses a 220V AC power supply, and the power socket should use a three hole safety socket. It must be properly grounded and the ground wire must not be connected to the gas pipe.

2. Before powering on, water should be injected into the pot above the partition. During use, the heating tube must not be exposed to the water surface, otherwise the heating tube will burn or even burst, or the solder will melt and leak, causing electric shock, etc.

3. Connect the power and set the temperature: Press the SET button to set or view the temperature setpoint. Press the SET key and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state and complete the temperature setting. If the temperature controller is intelligent, a separate temperature control manual should be attached

This machine has two indicator lights for heating and constant temperature to indicate the working status, and the temperature gauge shows the actual temperature inside the pot.

4. When using 100 ℃ boiling water distillation, do not add too much water to prevent overflow during boiling.