Chongqing plastic crusherMaintenance and upkeep

1. The plastic crusher should be placed in a ventilated position to ensure the heat dissipation of the motor during operation and extend its lifespan.

2. Lubricating oil should be regularly added to the bearings to ensure lubrication between them.

3. Regularly check the screws of the cutting tools. After using the brand new plastic crusher for 1 hour, use tools to tighten the screws of the moving and fixed knives, and strengthen the fixation between the blades and the knife holder.

4. To ensure the sharpness of the cutting edge of the tool, it is necessary to regularly inspect the tool to ensure its sharpness and reduce damage to other components caused by blunt or missing blade edges.

5. When replacing cutting tools, the gap between the moving and fixed blades should be 0.8mm for crushers above 20HP and 0.5mm for crushers below 20HP. The thinner the recycled material, the larger the gap can be adjusted appropriately.

6. Before the second start-up, the remaining debris in the machine room should be removed to reduce start-up resistance. The inertia cover and pulley cover should be opened regularly to remove the ash outlet under the flange, as the powder discharged from the plastic crusher chamber enters the shaft bearing.

7. The machine should be well grounded.

8. Regularly check whether the plastic crusher belt is loose and tighten it in a timely manner.