Stainless steel bending machine is a machine capable of bending thin plates. Its structure mainly includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket, and the worktable consists of a base and a pressure plate. The base is connected to the clamping plate through a hinge, and the base consists of a seat shell, a coil, and a cover plate. The coil is placed in a recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the coil is energized by a wire, which generates an attractive force on the pressure plate, thereby achieving the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressure plate can be made into various workpiece requirements, and can also process workpieces with side walls, making the operation very simple.

Structural characteristics of stainless steel bending machine:

1. Adopting a fully welded steel structure with sufficient strength and rigidity;

2. Hydraulic transmission, the oil cylinders at both ends of the machine tool are placed on the slider, directly driving the sliding work;

3. The slider synchronization mechanism adopts torsion axis forced synchronization;

4. Adopting a mechanical block structure, stable and reliable;

5. Quick adjustment of slider travel, manual fine-tuning, counter display;

6. A wedge type deflection compensation mechanism is used to ensure high bending accuracy.

Working principle of stainless steel bending machine:

The hydraulic bending machine includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket, and the worktable consists of a base and a pressure plate. The base is connected to the clamping plate through a hinge. The base consists of a seat shell, a coil, and a cover plate. The coil is placed in a recess of the seat shell, and the top of the recess is covered with a cover plate.

When in use, the coil is energized by a wire, which generates an attractive force on the pressure plate, thereby achieving the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressure plate can be made into various workpiece requirements and can also process workpieces with side walls. The bending machine can meet the needs of various workpieces by replacing the bending machine mold.

Operating procedures for stainless steel bending machine:

1. Strictly follow the operating procedures for machine tool workers and wear labor protection equipment according to regulations;

2. Before starting, it is necessary to carefully check whether the motor, switch, circuit, and grounding are normal and secure, and check that all operating parts and buttons of the equipment are stuck in the correct position;

3. Check the overlap and firmness of the upper and lower molds; Check whether each positioning device meets the requirements for processing;

4. When the skateboard and all positioning axes are not at the origin, run the return to origin program;

5. After the equipment is started, it should be idle for 1-2 minutes, and the skateboard should be fully moved 2-3 times. If any abnormal sound or malfunction is found, the vehicle should be stopped immediately, and the fault should be eliminated before it can work normally;

6. During work, one person should be in charge of unified command to ensure close cooperation between the operator and the feeding and pressing personnel, and to ensure that all cooperating personnel are in position before issuing the bending signal;

7. When bending the sheet metal, it must be compacted to prevent the sheet metal from lifting and injuring people during bending;

8. When adjusting the sheet metal pressing mold, the power must be cut off and the operation must be stopped before proceeding;

9. When changing the opening of the variable lower mold, no material is allowed to come into contact with the lower mold;

10. When the machine tool is working, no one is allowed to stand at the rear of the machine tool;

11. It is strictly prohibited to press the folded plate material separately at one end;

12. If the workpiece or mold is found to be misaligned during operation, it should be stopped for calibration. It is strictly prohibited to use hands to calibrate during operation to prevent hand injury;

13. It is prohibited to fold excessively thick iron plates or quenched steel plates, alloy steels, square steels, and plates that exceed the performance of the plate bending machine, in order to avoid damaging the machine tool;

14. Regularly check the overlap of the upper and lower molds; Whether the indication of the pressure gauge complies with the regulations;

15. Immediately stop the machine in case of any abnormality, check the cause and promptly eliminate it;

16. Before shutting down, place wooden blocks on the lower mold below the oil cylinders on both sides to lower the upper sliding plate onto the wooden blocks;

17. Exit the control system program first, and then cut off the power.