Simple suspension combined impact testing machine

Simple suspension combined impact testing machineIntroduction:

1LCD plastic impact testing machinePurpose:

LCD plastic impact testing machineIt is a testing instrument used to test the impact resistance of non-metallic materials such as plastic, nylon, rubber, fiberglass, composite plastic pipes, and electrical insulation materials under dynamic loads.LCD plastic impact testing machineAdopting semi-automatic control, it is easy to operate and has high work efficiency. Automatically obtain test data after impacting the specimen. The superiority can be better demonstrated in laboratories and manufacturers that conduct continuous and extensive impact tests.LCD plastic impact testing machineThe dedicated control panel and display screen provided can meet the operational and display requirements for user testing, such as displaying impact absorption energy, impact strength, pendulum movement angle, and printing test reports.

IILCD plastic impact testing machineMain technical indicators:

1. Impact energy: 0-4J

Host: simply supported beam:

Sample span: 40mm, 60mm, 70mm, 95mm

Sample width: 4mm-15mm

Sample thickness: 3mm-10mm

Pendulum impact velocity: V=3.8 m/s

Pre elevation angle: 150 °

Distance from the center of the pendulum axis to the center of the specimen: 380mm

1. Impact energy: 0-5.5J

Host: Cantilever beam:

Sample width: 4mm-12.7mm

Sample thickness: 12.7 ± 0.15mm

Sample length: 63.5mm

Pendulum impact velocity: V=3.50m/s

Pre elevation angle: 150 °

Distance from the center of the pendulum axis to the center of the specimen: 380mm

IIILCD plastic impact testing machineto configure:

1. One host

2. One LCD controller

3. A simply supported beam and a cantilever beam pendulum each (4J, 5.5J)

4. One printer

4LCD plastic impact testing machineattachment

1. Positioning device (span positioning device, sample positioning device)

2. One set of Allen wrench

3. Two span supports and gaskets

4. The host has four horizontal bases

5LCD plastic impact testing machineImportant safety guidelines:

1. Before installing and operating this system, please carefully read all the following instructions and follow all precautions and operating methods.

2. Clean the entire machine with a dry cloth and cover it with a cloth to prevent dust.

3. Regularly apply a layer of rust proof oil on the hammer head, hammer seat, and their accessories according to the air temperature and humidity conditions.

4. This equipment should be placed in a dedicated laboratory and managed by a dedicated person.

VILCD plastic impact testing machineprecautions

1. This equipment should be placed in a dedicated laboratory and managed by a dedicated person.

2. Horizontal placement, use a level ruler to adjust the level during installation.

3. Install the span of the base bracket according to the manufacturer's sample size.

Attention: After replacing the pendulum and base, be sure to slowly lower the pendulum so that it passes through the center of the base before it can be used normally.

Product keywords: LCD impact; Impact testing machine; Pendulum impact testing machine; to attack; Simply supported beam impact; Cantilever beam impact;

Related product links: