Shanghai Weiming Series Battery Capacity Tester

Intelligent Capacity Tester
It has the characteristics of digital display, sound and light alarm, automatic discharge stop when the set discharge termination voltage is reached, and no need to wait nearby, making the operation very convenient.
Shanghai Weiming Series Battery Capacity Tester
Display the voltage, current, and testing time (current) of the entire battery pack×Time=Capacity), can be equipped with a voltage display instrument for each battery in the series connected battery pack

(See the introduction of the battery inspection device below)

kg

The wiring sequence of the four core aviation plug for the above equipment with aviation plug connected to battery is as follows:

1- Red thick line 2- Red thin line 3- Black thin line 4- Black thick line

The red crocodile is clamped to the positive pole of the battery, and the black crocodile is clamped to the negative pole of the battery. Output line length: 0.5 to 1mWM-F5A/25-64V

Series connected battery capacity tester
Technical Parameter
Working voltage: AC 200-240V/50Hz mains power
Battery type: 4-5 series connected 12V or 16V batteries
Discharge current: Adjustable from 0.5 to 5.0A, with 0.1A as the adjustment unit40Discharge termination voltage:
Adjustable up to 60V, with 0.1V as the adjustment unitAccuracy of current and voltage: zero point five
%
Timing time: 0-9999 minutes
Volume (length x width x height): 300mm x 280mm x 130mm

Weight: 8.5kgWM-F5A/157.5-210V

Series connected battery capacity tester
Technical Parameter
Technical Parameter
Working voltage: AC 200-240V/50Hz mains power
Battery type: Series connection of 15-18 12V batteries (5.0-10AH)
Discharge current: Adjustable from 0.5 to 5.0A, with each 0.5A as the adjustment unitDischarge termination voltage:157.5V
Adjustable to 210V, with every 0.5V as the adjustment unit
Accuracy of current and voltage: 0.5%
Timing time: 0-999 minutes
Volume (length x width x height): 412mm x 280mm x 130mm

Weight: 13.5 kg

Shanghai Weiming Series Battery Capacity Tester

WM-F6A,10A,15A,20A,30A,40A/400vmicrocomputer

Series connected battery capacity tester

Capable of conducting discharge capacity testing on 3 to 30 12V batteries of the same capacity specifications connected in series

Brief introduction

This machine is mainly used for automatic capacity testing of batteries.

Adopting an intelligent microcomputer control system with comprehensive monitoring functions such as programming, display, and recording, the entire working process can be automatically completed according to programming settings. When discharging, the electrical energy can be fed into the grid to save energy!

Connecting to a computer allows remote control, programming, displaying, and recording of detection data.

2、 Technical parameters

1. Discharge current: Constant current 0-6.00A can be set arbitrarily.

2 . Discharge voltage: Termination 400.0~0V can be set arbitrarily.

3. Battery voltage: The nominal DC12V battery is charged and discharged in series with 3-30 units.4. Operation mode: constant current discharge, cyclemanystepsparagraph

Discharge Static, etc. can be set arbitrarily.

5. Time setting: 0-99 hours, 59 minutes, and 59 seconds can be set arbitrarily.

6. Cycle times: 1-999 times can be set.

7. Output accuracy: better than ± 1%.

8. Work record: The work is automatically recorded upon completion and can be viewed on the machine.

9 . Remote monitoring: Connect to a computer to control monitoring and record operational data.

10. Data recording: The computer can set the sampling time from 1-999 minutes.

11. Fault protection:

Automatically pause operation when there are circuit faults such as abnormal voltage or high temperature,

Automatically restore to the pre fault state after troubleshooting.

12. Midway power outage: automatically switches to a pause state, and automatically returns to the state before the fault when powered on again.

13. Power input: three-phase AC380V ± 10% 50Hz (I ≤ 5A × 3 phases).

15. Weight: 21 kg

Shanghai Weiming Series Battery Capacity TesterWM-F5A,10A,15A,20A,30A,40.00A/200V

microcomputer

Series connected battery capacity tester

Capable of conducting discharge capacity testing on 1 to 13 12V batteries of the same capacity specification connected in series

Brief introduction

1. This machine is mainly used for automatic capacity testing of batteries.

Adopting an intelligent microcomputer control system with comprehensive monitoring functions such as programming, display, and recording, the entire working process can be automatically completed according to programming settings,

Connecting to a computer allows remote control, programming, displaying, and recording of detection data.2、 Technical parameters

1. Discharge current: constant current 0-5.00A, 10.00A, 15.00A, 20.00A, 30.00A, 40.00A

Can be set.

2. Discharge voltage: The termination voltage can be set from 0 to 200.0V.3. Battery: 1 to 13 DC12V batteries can be connected in series in any number.4. Operation mode: Constant current discharge cyclemanysteps

paragraph

Discharge Static and other settings can be made.

5. Working hours: 0-99 hours, 59 minutes, and 59 seconds

6. Cycle times: 1-999 times can be set

7. Output accuracy: better than ± 0.5%.

8. Work record: The work is automatically recorded upon completion and can be viewed on the machine.

9 . Remote monitoring: Connect to a computer to control monitoring and record operational data.

10. Data recording: The computer can set the sampling time from 1-999 minutes.

11. Midway power outage: automatically switches to a pause state, and automatically returns to the state before the power outage when it is restored.

12. Power input: single-phase AC220V ± 10% 50Hz, I≤5.5A。

13. Dimensions: Width 45 x Height 15 x Depth 48 (centimeters).

14. . Weight: 17.5 kgShanghai Weiming Series Battery Capacity TesterVoltage display instrument for each battery in the series connected battery pack

-

Battery inspection device

This battery inspection device has the following main functions and features:

1. Real time monitoring and display of the voltage of each individual cell in the battery pack and the voltage of the entire battery pack;

2. It has overvoltage and undervoltage alarm functions for single battery voltage and the entire battery pack voltage, with relay contact output and sound, light indication;

3. Adopting a backlit multi dot matrix rectangular LCD display, the voltage value of each battery in the battery pack is displayed simultaneously on one screen

6. The number of batteries for inspection can be freely set to accommodate battery packs with different numbers of batteries5. Optional RS232/RS485 communication interface, can be connected to a computer to upload dataFree with electricitybraincommunication software,Data that can upload inspection records,Automatically generate data tables,display,Storage,print.

Monitored by a computer,

The computer display is shown in the image on the right below

Select WM-19 type 4 to 18 cell batteries,