Product Features

·Fully automatic cleaning,Automatic water intake and drainage, automatic addition of cleaning agentsBuilt in three standard cleaning programs for selection, as well as customizable cleaning parameters and programs.

·Can clean various specifications of injection bottles such as 1mL, 2mL, 5mL, 10mL, etc,Up to 200 2mL injection bottles can be cleaned at once.

·A completely independent pure water and tap water spray system, with separate pipelines for pure water and tap water to avoid cross contamination and ensure the cleanliness of the final stage of cleaning - rinsing.

·The pure water machine is equipped with a large volume pressure tank,Automatically output high-quality pure water,Meet cleaning needs.Can automatically clean RO reverse osmosis membrane,Easy replacement of consumables and pure water machineCan be used alone.

·The programmable spray system can save up to 50% or more of pure water consumption based on the amount of cleaning.

·Equipped with drying function and adjustable drying temperature, after cleaning,AUTOSAMPLER VIALSReady-to-use.

·After an unexpected power outage, the liquid in the cleaning tank can be automatically emptied.

·LCD display screen, fully operated in Chinese, animated display of cleaning process, voice and indicator lights jointly indicate the working status.

·A complete fault detection and protection mechanism, including water shortage, low water level, high water level, low water pressure, etc., and provides voice prompts.

workflowCheng

·Pre cleaningwash
Clean the impurities with low adhesion inside the sample bottle and complete the rough washing.
The pre cleaning process is:Use high-pressure tap water jet to set the time and clean the inner wall of the injection bottle. Soak the injection bottle in water again, rotate the bracket at high speed, clean the outer wall of the injection bottle for the specified time, and then drain the water. The number of times this setting is repeated.

·Immersionbubble
The machine automatically adds a certain proportion of cleaning agent (or does not need to add cleaning agent), mixes it with tap water, heats the mixture to the set temperature, and soaks the sample bottle for the set time to make it attachedImpurities with strong force are fully dissolved. During the soaking process, the high-pressure water pump is turned on to inject liquid into the sample bottle,Fill the injection bottle with liquid.

·In the middleand
The cleaning agent used during soaking is usually a low residue alkaline cleaning agent. In order to eliminate the residue of the cleaning agent,Acidic cleaning agents can be used for neutralization, which involves adding acidic cleaning agents and water in a certain proportion to neutralize possible residuesAlkaline cleaning agent. If no cleaning agent is used during the soaking process, this step can be omitted.

·After neutralization, supersound
Use ultrasonic cleaning for the second time to enhance the cleaning effect of the sample bottle.

·Driftingwash
Rinse the bottle with a high-pressure water column sourced from tap water to remove any cleaning solution and other residues.

·Rinse off

MakeRinse with high-pressure water column using pure water with conductivity<0.1 μ S/cm as the water source, and rinse with tap water during the rinsing processClean it thoroughly.

·Drying
Flip the sample bottle holder upside down and dry it. The drying temperature can be set, and after cleaning,AUTOSAMPLER VIALSCan be used immediately.

Product parameters