Power transmitter SINEAX P530/Q531

▶Product Introduction

SINEAX P530/Q531 power transmitter is used to measure the active power/reactive power of single-phase AC current or three-phase current.

▶Product Features

▪Monitor power consumption in energy distribution systems and process engineering

▪Determine the time sequence of power input

▪Avoid underload and overload situations, load control

▪Monitoring rotating machinery

▪Monitoring blockage, for example, in conveying equipment

▪Monitor energy distribution

▪The output signal can be used for indication, registration, monitoring, and control

▪Ensure safety through current isolation and shockproof terminals (IP20)

▪Germanischer Lloyd standards, applicable to ships

▶technical data

▪Measurement input: single-phase AC current, 3-wire three-phase current with balanced/unbalanced load or 4-wire three-phase current with balanced (P530 only)/unbalanced load

▪Nominal voltage Un 100... 115V, 200... 230V, 380... 440V, 600... 690V or 100... 690V

▪Nominal current In 1A, 5A or user-defined (1... 6A)

▪The maximum measurement range is ≥ 0.75 to 1.3

▪Nominal output, unipolar or bipolar

▪Nominal frequency 50/60Hz, sine wave

▪Measurement range: P530: Maximum value ≤ 0.75 to 1.3 · nominal output, unipolar or bipolar Q531: maximum value ≤ 0.5 to 1.0 · nominal output, unipolar or bipolar

▪Measurement output: maximum output value 1mA, 2.5mA, 5mA, 10mA, 20mA, 10V or user-defined 1... 20mA or 1... 10V, output signal unipolar, bipolar or zero crossing, set time<300ms

▪Measurement principle: TDM method

▪Accuracy: Level 0.5 within 15... 30 ℃

▪Power supply: 24-60V AC/DC or 85-230V AC/DC, ≥ 85-230V AC from measurement input or 24V AC/24-60V DC, connected through the low voltage side

▪External dimensions: 69.1x70x112.5mm (single-phase), 69.1x105x112.5mm (3/4 line three-phase current)

▶Standing type