Transmitter SINEAX F535

▶Product Introduction

SINEAX F535 transmitter is used to obtain the frequency difference between two synchronous systems..

▶Product Features

▪Determine the frequency difference as a synchronous control variable
▪Germanischer Lloyd standards, applicable to ships
▪The output signal can be used for indication, registration, monitoring, and control
▪Ensure safety through current isolation and shockproof terminals (IP20)

▶technical data

▪Measurement input: Input nominal voltage of 10... 230V or 230V 690V
▪Measurement range: fS = 50 Hz: fG = 49.5…50…50.5 Hz, fG = 47.5…50…52.5 Hz,
fG = 47.5…50…52.5 Hz, fG = 40…50…60 Hz, fS = 60 Hz:
FG=57.5... 60... 62.5 Hz or user-defined between 10 and 1500Hz
[fS=frequency bus, FG=frequency generator]
▪Measurement output: The maximum output value is 0... 20mA, 4... 20mA, 0... 10V, or user-defined within the range of 1... 20mA or 1... 10V. The output signal is unipolar, symmetrical bipolar, or zero crossing, and the setting time can be selected from 2, 4, 8, or 16 cycles of the input frequency
▪Accuracy: Level 0.2 within 15... 30 ℃
▪Power supply: 24-60V AC/DC or 85-230V AC/DC (can also be measured from internal input), 24V AC/24-60V DC, connected through the low voltage side
▪Dimensions: 69.1 x 70 x 112.5 mm, with top cap guide rail installation (35x15mm or 35x7.5mm)

▶application

The prerequisite for parallel connection of the generator to the same bus when voltage, phase, and frequency are balanced. The determination of frequency difference is obtained by synchronously measuring the bus voltage and generator voltage. The SINEAX F535 transmitter is also suitable for distorted voltages dominated by fundamental waves, and outputs a DC signal proportional to the measured frequency difference.