Single function transmitter SINEAX DME4 installed on top cap guide rail, A200, M56X

▶Product Introduction

SINEAX DME4, A200, M56X devices are used to simultaneously obtain multiple variables of high current systems.

▶Product Features

•Only one measuring unit is used for multiple high current variables, level 0.2

•PC software with password protection for configuration and trial operation

•The output signal can be used for display, registration, metering, and monitoring

•All circuits and shock resistant terminals are isolated by safety electrical isolation

▶Technical Parameter

•Measurement input:Nominal current 1... 6mA, nominal frequency 50 or 60Hz,The nominal voltage is 57.7... 400V (Ph-N) or 100... 693V (Ph Ph),Reduce phase shift connection with balanced load (2 voltages, 1 current)

•System configuration: single-phase AC current, 3/4 line three-phase current with balanced/unbalanced load or 3-line three-phase current0.6... 1.6s (M56x), depending on device type and programming

•Measurement output: Depending on the device type, the measurement cycle time is 0.13... 0.99s (DME4) or

•Accuracy: State variables via bus interface: Level 0.25 (DME4), Level 0.5 (M56x)

•DME4 only: Active power meter: Level 1, reactive power meter: Level 2,It can also be input from internal measurement

•Power supply: 24-60V AC/DC or 85-230V AC/DC or AC powered 230V AC (DME4 only),

•External dimensions: DME4: 69.1 x 105 x 112.5 mm; M56x: 69.1 x 105 x 112.5mm，Top mounted guide rail installation (35x15mm or 35x7.5mm)

▶Equipment Overview

▶attachment

•Configure software DME4

•Configure software M560

•RS232 programmable cable for DME4

•PRKAB560 programmable cable for M56x

•Connect cable D-Sub9 female/male head,

•Order number 154071 (included in the delivery scope in A200)

•Top cap rail adapter for SINEAX A200

•Order number 154055