Ground laser scanning instruments provide overUltra long distance measurement capability of 6000 meters. The VZ-6000 can even be used in low visibility conditions such as sandstorms, foggy weather, rainy weather, and snowy weather to identify multiple target echoes. There are various models of ground laser scanning instruments to meet your needs. Even under very poor visibility conditions such as sandstorms, foggy weather, rain and snow, it can still work normally.

RIEGL VZ-6000 is a newly launched VZ series 3D laser scanner that provides ultra long distance measurement capabilities of over 6000 meters. The VZ-6000 can even be used in low visibility conditions such as sandstorms, foggy weather, rainy weather, and snowy weather to identify multiple target echoes.

special spot

lDistance measurement exceeds6000 meters

lSuitable for snow and glacier measurement

lLaser emission frequency up to300 kHz

lBuilt in calibrated full frame camera

lCan receive infinite echoes

Typical applications:

lTopographic and mining surveying

lGlacier mapping

lSnow area monitoring

lUltra long distance monitoring

lcivil engineering

lArchaeology

Ultra long measuring range

High speed, high-resolution 3D laser scannerThe V-Z-6000 provides an ultra long measuring range of over 6000 meters and a wide field of view range of 60 ° vertically and 360 ° horizontally.

Based on digital echo and online waveform processing technology, The RIEGL V series scanner has high measurement accuracy and reliable measuring range. Even when working in conditions with poor visibility such as sandstorms, foggy weather, rain, and snow, the Vz6000 still has the ability to measure over long distances.

Built in digital camera

built-inThe 5-megapixel digital camera captures images reflected by prisms, and after taking photos of the entire scanning area, the device automatically combines the captured images into a high-resolution panoramic photo. Panoramic photos can be combined with point clouds obtained by Vz-6000 to create photo level realistic models for geological and geotechnical investigations, avalanche studies, geomorphology, and geological features.

Waveform data output(Optional)

adoptThe digital echo signal obtained by Vz-6000, also known as waveform data, is the basis for waveform analysis. By using RIEGL RIWAVELib software to output useful waveform data, digital waveform data based on echo signals can be used to investigate and study the situation of multiple echoes.

Compatible software packages

RIEGL VZ-6000 is compatible with RISCAN PRO software, Rjb, and workflow optimization software packages such as RIMING for ground laser scanners. The optional software plugin RIMTA3D can automatically allocate scanned data to the correct MTA area.

Data stitching method

Direct targeting

lConnect built-inGPS receiver (L1)

lConnect externallyRTK GNSS receiver

lBuilt in digital compass, with an accuracy of 1 ° (@ 1 σ, used to record the vertical position of the scanner)

lBuilt in laser calibrator(Tilt angle range ± 10 °, accuracy ± 0.008 °)

GNSS wire measurement

lGNSS position (RTK or built-in)

Built in laser calibrator

lAutomatic scanning of targets(Reflective film)

Autonomous positioning

lFine scanning of target positioning scanner on control points

Rear view

lSet up a scanner on a known coordinate point

lBuilt in laser calibrator

lFine scanning of target positioning scanner on control points