http://www.ht16.net

QC-639P(Q) Computerized impact testing machine

Computerized Impact Tester

standard

ISO13802、DIN53453、ASTM D256、ISO180、ASTM D6110、ISO179

Machine Description

The computerized pendulum impact testing machine can correct parameters such as motion loss, wind resistance, and pendulum energy error during the testing process on the machine. The minimum angle that can be read using non-contact high-precision sensors is0.05Degree, simple operation can directly read the energy value of the completed test from the display screenIt can be tested using single machine shape recording or online through computer software.

The testing capacity range of this model is suitable for impact strength testing of polymer materials. The potential energy of the pendulum is used to impact the test piece and calculate the remaining potential energy of the pendulum after impact. The controller can automatically calculate the energy absorbed by the test piece during the testing process.

The accuracy of the pendulum is closely related to the precision of the test. Not only the accuracy of the pendulum energy, but also the position of the entire mass center (registered trademark in Shanghai) will affect the impact speed, causing errors in the test. Guangrui adjusts the energy of each pendulum to ensure accurate performance.

IZOD / CHARPYIt is two forms of frequent testing,QC-639P/QBy replacing the pendulum and fixture types for different testing methods, we can save the waste of repeated machine procurement.

Applicable industries

plastics industry

Machine appearance

(Full face windproof hood impact testing machine)

Machine specifications

Machine model			QC-639P		QC-639Q
Test type		IZOD / CHARPY
Test capacity		Izod 1~11J Charpy 1~5J		Izod 11~50J Charpy 5~50J
energy loss		< 2.5%
Best testing range		For the capacity of the hammer10 ~ 90%within
Machine display angle	0.05degree
Impact angle		150°
Optional selection	Full face windproof cover
Computer connection method			TCP/IP
Machine power supply		single-phase100 ~ 240 V
Machine size		96×42 ×75cm		110x50x105cm
machine weight			210kg		300 kg

Machine features

1. The testing method can be customized by selecting different pendulum and fixture accessories according to the specifications for self installation and use

2. The test piece fixture is equipped with a positioning device to reduce the error caused by clamping

3. High machine resolution improves accuracy when testing small capacity test pieces

4. During testing, only the buttons are needed to automatically perform the test. Prior to testing, there are3A second warning sound alerts the user

5. Computerized models do not require residual needles, which can reduce resistance and testing errors

6. The stability of the machine can be determined before using a level gauge

7. Fully automatic testing, the pendulum can automatically return to its original position after completing the impact

8. Equipped with a transparent protective cover, the operation of the machine is entirely carried out by the buttons on the machine, making it safer and more convenient to operate

9. It can be operated and tested through a single electronic touch display panel, and the touch buttons can reduce damage to panel components. Optional software can be used to connect to a computer for convenient data storage and analysis.

Common accessories

Izod Test

Izod Vise Izod Hammer

Charpy Test

Related products

QC-9130(A)Metal impact testing machine

QC-639C(D)Mechanical impact testing machine,

QC-640Impact test piece angle cutting machine