Zhejiang Qianrong Electric Technology Co., Ltd
Home>Products>Positive pressure explosion-proof distribution cabinet for chemical plant reaction kettle
Positive pressure explosion-proof distribution cabinet for chemical plant reaction kettle
The positive pressure explosion-proof distribution cabinet for chemical plant reaction vessels is suitable for Class II, Class B or C, and for Zone 1
Product details

Positive pressure explosion-proof distribution cabinet for chemical plant reaction kettle

Suitable for Zone 1 and Zone 2 of Class II, Class B or C, T1-T4 and below, hazardous areas containing explosive gas environments. Used in AC 50Hz, rated voltage 220 or 380V lines to control the start and stop of three-phase asynchronous motors, and can also be used for remote control of motors. It has overload and short circuit protection functions.
working conditions
a. Altitude not exceeding 2000m;
b. The ambient air temperature shall not exceed+40 ℃, not be lower than -5 ℃, and the average value within 24 hours shall not exceed+35 ℃;
c. The relative humidity of the surrounding air does not exceed 95% (+25 ℃);
d. In an environment without damaging the insulation with gas or vapor;
e. Pollution level: Level 3;
f. Installation category: Class II, III;
g. Outdoor distribution box with high solar radiation of 1120W/㎡ and rainfall intensity of 6mm/min;
h. Places without significant shaking or severe impact vibration;

Installment and use

1. Before installing and using the product, check whether the technical data on the nameplate matches the usage situation;

2. Before installation and maintenance, the front-end power supply must be cut off;

3. The incoming and outgoing cables pass through rubber sealing rings, and are tightened with washers and compression nuts to ensure that the seals and cables are not loose;

4. If the sealing ring corrodes, cracks, deforms, becomes sticky, or experiences a hardness change exceeding 20% of its original value during use, it should be promptly purchased and replaced from the manufacturer to ensure reliable explosion-proof performance;

5. During maintenance and disassembly, pay attention to the explosion-proof surface not being bumped, scratched, or corroded, and regularly apply 204-1 anti rust oil;

6. The distribution box should be regularly inspected during use to ensure its good operation;

7. Non professionals are strictly prohibited from opening the cover for maintenance and inspection.

Positive pressure explosion-proof distribution cabinet for chemical plant reaction kettle

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!