PM disc grinder

PM disc grinder is an ultrafine grinder that uses disc grinding method. Control the grinding particle size by precisely adjusting the gap between the upper and lower grinding discs. It is a universal ultrafine grinding machine for both dry and wet processes. Grinding discs come in various materials and shapes, suitable for various medium hardness materials such as chemical, mineral, food, pharmaceutical, etc.

Principle:

The PM disc grinder is a traditional grinding disc that rotates at high speed between the upper and lower grinding discs, forming a crushing and grinding surface between the two grinding discs at the foot of the mountain. The material enters the grinding gap through the guide and is crushed and ground at high speed. Scientific and precise control of the gap between the two grinding discs at the foot of the mountain to control the particle size of the material. The grinding disc is made of high-strength and wear-resistant special materials, and there are various shapes and materials of grinding discs corresponding to different materials.

characteristic:

The disassembly and assembly of the grinding disc are very easy, and it is also easier to clean and wash.

Precise control, rotating the grinding disc with a gap of 1/100mm and up and down adjustment.

There are various types and shapes of grinding discs, suitable for different materials.

Dry and wet methods are universal and not limited by the moisture content or state of the material.

It can control the particle shape of material particles, including circular, needle shaped, and sheet-like shapes.

Widely applicable, suitable for various medium hardness materials such as chemical, mineral, food, pharmaceutical, etc.

Reference parameters: