This equipment is made of stainless steel, alloy aluminum, and chrome plated materials as a whole, and the sealing material is silicone rubber, ensuring internal cleanliness and high thermal efficiency. The maximum working temperature can reach 130 ℃. The temperature can be set according to requirements and automatically controlled.

instructions:
support“drying time”、“sterilization time”Set at the required value, if sterilization is performed directly without drying operation, then“drying time”Set in00Value.
Turn the temperature setting knob to the desired temperature value, usually set it to the sterilization temperature value.
Turn on the main switch, and the machine starts to enter the dry operation state. After drying, the machine will automatically switch to sterilization operation, and the machine will automatically stop after sterilization is completed.
Turn off the main switch and open the door to retrieve materials.
Scope of application:
This equipment is suitable for drying and sterilizing instruments and products in hospitals, laboratories, canteens, as well as industries such as pharmaceuticals, chemicals, and electronics.
Installation requirements:
Place it on a flat ground and in a well ventilated environment.
Power requirements:220V，50HzThe wire bears the current10Aabove.
The casing of this device should have a good grounding.
Technical parameters:
Electric power:0.3Kw×6=1.8KwVoltage:220V, maximum temperature:130℃；
Effective Capacity: Width×deep×tall=600×460×900；
Dimensions: Width×deep×tall=700×560×1200；
Material tray:590×450common6Only;250×450common4Only;
Drying time:0-9.9Hour, sterilization time:0-9.9Hour;